No display after gpu OC

[Vlad S]

Hello, so yesterday i built my first PC.

Specs:

MSI MEG x570 Ace

Ryzen 7 3700x

Be Quiet! Dark Rock PRO 4

MSI 2070 Super Gaming x Trio

Samsung 970 1tb

Corsair RM750x

G.skill trident z neo 32gb 3600mhz

After building it i changed my ram speed to from 2166 i think to 3600 and changed the infinity frabric to 1800. Everything worked fine.

Today i wanted to overclock my gpu. So i did using msi's own afterburner and kombustor.

After finishing everything looked fine and and the gpu temperature under pressure was under 75 C.

But when i tried to stress test in in 3d mark to see the stability of my system, the program crashed so i slowly started tweaking down my gpu overclock. After several tries the system shot itself down when i tried opening the stress test and i had no signal on the monitor from the cpu. My mobo does not have any hdmi or displayports so i cant really see what happened.

Until now i tried using the cmos button on the mobo and taking out the battery on the mobo, waiting 10-15 mins and putting it back on. Nothing has worked. Does anyone know what happened or what i can do? Everything in the system seems to boot, the rgb compontents (including the gpu) do turn on, yet i still get no display.

Edit: other than the ram speed and infinity fabric i did not change anything in the bios.

[Fasauceome]

text color is black

5 minutes ago, Vlad S said:

Hello, so yesterday i built my first PC.

Specs:

MSI MEG x570 Ace

Ryzen 7 3700x

Be Quiet! Dark Rock PRO 4

MSI 2070 Super Gaming x Trio

Samsung 970 1tb

Corsair RM750x

G.skill trident z neo 32gb 3600mhz

After building it i changed my ram speed to from 2166 i think to 3600 and changed the infinity frabric to 1800. Everything worked fine.

Today i wanted to overclock my gpu. So i did using msi's own afterburner and kombustor.

After finishing everything looked fine and and the gpu temperature under pressure was under 75 C.

But when i tried to stress test in in 3d mark to see the stability of my system, the program crashed so i slowly started tweaking down my gpu overclock. After several tries the system shot itself down when i tried opening the stress test and i had no signal on the monitor from the cpu. My mobo does not have any hdmi or displayports so i cant really see what happened.

Until now i tried using the cmos button on the mobo and taking out the battery on the mobo, waiting 10-15 mins and putting it back on. Nothing has worked. Does anyone know what happened or what i can do? Everything in the system seems to boot, the rgb compontents (including the gpu) do turn on, yet i still get no display.

Edit: other than the ram speed and infinity fabric i did not change anything in the bios.

fixed it for dark theme users

[ChaoticChaosx]

Ryzen has no on board graphics so it wouldn't work through motherboard it should only be from gpu display ports.

Or am I reading wrong?

 

[Vlad S]

@ChaosCGTV what i meant is that i cannot acces windows because my gpu does not send any signal to the display

[Lelouch Lamperouge]

@Vlad S

Do you have 2 bios maybe? Also it won't be covered by warranty. You should try something else like DVI-D port or try with diffrent monitor. If that's ain't working send pc to local specialist.

[ChaoticChaosx]

1 minute ago, Vlad S said:

@ChaosCGTV what i meant is that i cannot acces windows because my gpu does not send any signal to the display

What lelouch said

Just from OC though?

I had built a ryzen for a friend and it was the ram for his issue of the same thing. Have you tested that?

[Vlad S]

update.... i switched up the gpu with the one from my old pc and it works.... so i guess that means that i fried my gpu?

 

[Lelouch Lamperouge]

1 minute ago, Vlad S said:

update.... i switched up the gpu with the one from my old pc and it works.... so i guess that means that i fried my gpu?

 

Seems like it. You shouldn't ever oc it without any proper experiance or knowledge...

Try sending it somewhere to pc local shop or something theye might be able to flash bios again and restore it to factory settings.
Or you can send it to warranty and pretend to be stupid.

[Vlad S]

4 minutes ago, Lelouch Lamperouge said:

@Vlad S

Do you have 2 bios maybe? Also it won't be covered by warranty. You should try something else like DVI-D port or try with diffrent monitor. If that's ain't working send pc to local specialist.

are you completely sure that it wont be covered by the waranty? since i did not do any physical change to the gpu, nor did anything in the bios, is there anything else i can try?

[Vlad S]

1 minute ago, Lelouch Lamperouge said:

Seems like it. You shouldn't ever oc it without any proper experiance or knowledge...

Try sending it somewhere to pc local shop or something theye might be able to flash bios again and restore it to factory settings.
Or you can send it to warranty and pretend to be stupid.

what do you mean by that?

[Lelouch Lamperouge]

Just now, Vlad S said:

are you completely sure that it wont be covered by the waranty? since i did not do any physical change to the gpu, nor did anything in the bios, is there anything else i can try?

. To be perfectly clear, overclocking will NOT VOID your warranty.
   You can only try  taking out the gpu and try on other motherboard

[Lelouch Lamperouge]

Just now, Vlad S said:

what do you mean by that?

Well when I broke something and send it for warranty I always lie so theye give me a new product for free.
It might not work for you who knows.

[Vlad S]

so i still have my waranty on the gpu.

1 minute ago, Lelouch Lamperouge said:

. To be perfectly clear, overclocking will NOT VOID your warranty.
   You can only try  taking out the gpu and try on other motherboard

alright, i will try this now

[Vlad S]

1 minute ago, Lelouch Lamperouge said:

Well when I broke something and send it for warranty I always lie so theye give me a new product for free.
It might not work for you who knows.

like, if i say that it came broken?

[Lelouch Lamperouge]

Just now, Vlad S said:

like, if i say that it came broken?

Yea, but I belive your gpu model has 2 bios, try switching to other mode.

[Vlad S]

how do i do that? i dont have any display output with my gpu

[Lelouch Lamperouge]

Just now, Vlad S said:

how do i do that? i dont have any display output with my gpu

Look on every side of your graphics card an see if there is something called "Bios Switch"
My RX 580 has 2 bios, one is default and other is overclocked.

[ChaoticChaosx]

Just now, Vlad S said:

how do i do that? i dont have any display output with my gpu

Dual bios there should be a switch on the board itself. Well mine does anyways. Just hard to fry a gpu must've went insane trying to OC it. 

[Vlad S]

1 minute ago, ChaosCGTV said:

Just hard to fry a gpu must've went insane trying to OC it. 

i increased the coreclock with 100 and memory clock to 400, and everything worked until suddenly when i opened 3d mark the pc shut down

[Lelouch Lamperouge]

1 minute ago, Vlad S said:

i increased the coreclock with 100 and memory clock to 400, and everything worked until suddenly when i opened 3d mark the pc shut down

Try putting your gpu on diffrent motherboard.

[Vlad S]

alright... that will take some time

[ChaoticChaosx]

10 minutes ago, Vlad S said:

i increased the coreclock with 100 and memory clock to 400, and everything worked until suddenly when i opened 3d mark the pc shut down

Yeah that is a baby overclock, specially on turing.

[Vlad S]

9 minutes ago, ChaosCGTV said:

Yeah that is a baby overclock, specially on turing.

exactly....

 

[Vlad S]

21 minutes ago, Lelouch Lamperouge said:

Try putting your gpu on diffrent motherboard.

 it seems like my new gpu cant fit on the motherboard of my old pc.... im not sure why, it just wont sit well.

[Paez29]

On 2/22/2020 at 11:43 PM, Vlad S said:

Hello, so yesterday i built my first PC.

Specs:

MSI MEG x570 Ace

Ryzen 7 3700x

Be Quiet! Dark Rock PRO 4

MSI 2070 Super Gaming x Trio

Samsung 970 1tb

Corsair RM750x

G.skill trident z neo 32gb 3600mhz

After building it i changed my ram speed to from 2166 i think to 3600 and changed the infinity frabric to 1800. Everything worked fine.

Today i wanted to overclock my gpu. So i did using msi's own afterburner and kombustor.

After finishing everything looked fine and and the gpu temperature under pressure was under 75 C.

But when i tried to stress test in in 3d mark to see the stability of my system, the program crashed so i slowly started tweaking down my gpu overclock. After several tries the system shot itself down when i tried opening the stress test and i had no signal on the monitor from the cpu. My mobo does not have any roblox music codes hdmi or displayports so i cant really see what happened.

Until now i tried using the cmos button on the mobo and taking out the battery on the mobo, waiting 10-15 mins and putting it back on. Nothing has worked. Does anyone know what happened or what i can do? Everything in the system seems to boot, the rgb compontents (including the gpu) do turn on, yet i still get no display.

Edit: other than the ram speed and infinity fabric i did not change anything in the bios.

Also it won't be covered by warranty. You should try something else like DVI-D port or try with diffrent monitor.