Heat problems!!!

[ItzUknown]

I've been using the Ryzen 2600 since July and I more than satisfied. However I have been using the stock cooler because I want to buy an aio cooler (Corsair i115 platinum or something like that). Yesterday I changed my case and I also changed my cpu coolers fan curve because it was really loud. I changed it to something ok in my opinion (because I want it to be quiet) and then I opened Ryzen Master to see the temperature (keep in mind that I changed the thermal paste from the stock amd to arctic mx-4 because I had it and I thought it was better). Today I started playing and the fan was really loud, not only did the fan curve reset but when I changed it again the cpu ran really hot 80 C while playing and 60 idle . Also my power supple is really loud, the fan is running always and the cpu in ryzen master for some reason is always on 86% ish out of the 90A for the EDC section. Also the CPU is always turboing. What do I do is there a problem?? 

 

P.S. I changed the CPU fan curve from APP Center which is a gigabyte program and from the bios of a Gigabyte B450m pro wifi i whic is running a bios form 25/1/2019

[Fasauceome]

Since you took the cooler off, did you make sure you remounted it again with proper retention force?

[ItzUknown]

1 hour ago, Fasauceome said:

Since you took the cooler off, did you make sure you remounted it again with proper retention force?

Yep I can't turn any of the screws more and I tried to see if the cooler got loose on a side or something and its all good

I dont know why the EDC is so high tho

[ItzUknown]

2 hours ago, Fasauceome said:

Since you took the cooler off, did you make sure you remounted it again with proper retention force?

Do you have another suggestion?? My power mode is at balanced with the minimum proccessor setting adjusted to 5%. When I change it to Power Saver it changes back to normal but everything is kinda slow