Build not working

[Cranston]

My pc specs:

 

CPU: I7 9700KF

MOBO: Msi MPG z390 gaming edge

RAM Viper steel RAM (2 x 8gb 3000mhz)

GPU: Sapphire nitro rx480 oc

CPU COOLER: Using noctua nhd-15 

PSU: Corsair VS650

 

This is my first time upgrading my pc so i bought the new cpu/mobo/ram and cpu cooler. I used my previous gpu, psu, hdd and ssd.

 

I built this yesterday in the beautiful fractal design meshify c. It took longer than id like to admit but in the end i followed a guide and got it working (or so i thought) with some alright cable management.

 

Anyway the issue is that when i connect my monitors to thr gpu they do not display. The gpu fans are also the only ones that do not spin at all when i power the pc. I have tried the gpu in both pcie slots and no luck. I cannot use onboard graphics because as mentioned earlier i opted for the i79700KF to save some money (regretting that now)

 

Just wondering if anyone could help at all or if i need to buy a new gpu. Really have no idea what to do.

 

 

[boggy77]

did you plug in the power cable in the gpu?

[KingTdiGGiTTy]

Make sure your graphics card is plugged all the way into the PCIe slot. If you are trying to use the same windows install that could cause a problem. Check power connections

 

[Cranston]

10 minutes ago, boggy77 said:

did you plug in the power cable in the gpu?

Yes i have tried 2 different pcie connections 

[Cranston]

10 minutes ago, KingTdiGGiTTy said:

Make sure your graphics card is plugged all the way into the PCIe slot. If you are trying to use the same windows install that could cause a problem. Check power connections

 

All connections feel pretty solid and i tried putting gpu in again, pretty confident it is in all the way

[KingTdiGGiTTy]

23 hours ago, Cranston said:

Yes i have tried 2 different pcie connections 

The PCIe power cables?

Since the fans on the card aren't spinning it really sounds like the card isn't receiving power