Jump to content

Intel CPU block thumbscrews

SgtFilthyFrank
 Share
Posted

Hey there everyone!

 

Just seeing if anyone has a recommended website for purchasing thumbscrews for Intel 1366/2011 water blocks. I have no idea where one or them went and am in dire need to get one (or an entire set). The cpu water block in question is the XSPC and the motherboard is Asus ROG extreme IV formula. 

 

Cheers! 

Link to comment
https://linustechtips.com/topic/1127264-intel-cpu-block-thumbscrews/
Share on other sites
Link to post
Share on other sites
Posted

I didnt read that properly so yea. 

Im with the mentaility of "IF IM NOT SURE IF ITS ENOUGH COOLING, GO OVERKILL"

 

CURRENT PC SPECS    

CPU             : Ryzen 5 3600 (Formerly Ryzen 3 1200)

GPU             : ASUS RX 580 Dual OC (Formerly ASUS GTX 1060 but it got corroded for some odd reasons)

GPU COOOER      : ID Cooling Frostflow 120 VGA (Stock cooler overheats even when undervolted :()

MOBO            : MSI B350m Bazooka

MEMORY          : Team Group Elite TUF DDR4 3600 Mhz CL 16
STORAGE         : Seagate Baracudda 1TB and Kingston SSD
PSU             : Thermaltake Lite power 550W (Gonna change soon as i dont trust this)
CASE            : Rakk Anyag Frost
CPU COOLER      : ID-Cooling SE 207
CASE FANS       : Mix of ID cooling fans, Corsair fans and Rakk Ounos (planned change to ID Cooling)
DISPLAY         : SpectrePro XTNS24 144hz Curved VA panel
MOUSE           : Logitech G603 Lightspeed
KEYBOARD        : Rakk Lam Ang

HEADSET         : Plantronics RIG 500HD

Kingston Hyper X Stinger

 

and a whole lot of LED everywhere(behind the monitor, behind the desk, behind the shelf of the PC mount and inside the case)

Link to post
Share on other sites
Posted
11 minutes ago, SgtFilthyFrank said:

Hey there everyone!

 

Just seeing if anyone has a recommended website for purchasing thumbscrews for Intel 1366/2011 water blocks. I have no idea where one or them went and am in dire need to get one (or an entire set). The cpu water block in question is the XSPC and the motherboard is Asus ROG extreme IV formula. 

 

Cheers! 

Welcome to the Forums!

 

Which block is it exactly, your best bet is to direct contact the manufacture or to find out exactly what size thread they are to then get replacements. 

Updated Modding FAQ

Link to post
Share on other sites
Posted
  • Author
3 hours ago, W-L said:

Welcome to the Forums!

 

Which block is it exactly, your best bet is to direct contact the manufacture or to find out exactly what size thread they are to then get replacements. 

I believe it's the Rasa. It's discontinued but I'll give XSPC a call and see if they have replacements that they can send. I'm using the 1366 backplate adapter for LGA 2011 boards. Thanks for the advice everyone! 

 

Link to post
Share on other sites
Posted
6 hours ago, SgtFilthyFrank said:

I believe it's the Rasa. It's discontinued but I'll give XSPC a call and see if they have replacements that they can send. I'm using the 1366 backplate adapter for LGA 2011 boards. Thanks for the advice everyone! 

 

If they aren’t able to help you can bring the bolt that the thumb screw fastens onto to a hardware or fastener supply house to find the correct thread. With that you can adapt something that they might have on hand or purchase another set of 4 thumb screws. 

Updated Modding FAQ

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Custom Loop and Exotic Cooling

×