Jump to content

ARGB Case Compatibility

TheRCMGuy
 Share
Posted

I'm just wondering what type of header does the Antec DP301M ARGB connector have and if it's compatible with the MSI B450m Bazooka Plus. And if not what's the best mATX case for budget builds?

 

Cheers!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, TheRCMGuy said:

Antec DP301M ARGB

This case is not compatible with motherboard software. You can tell because nowhere does it say "Asus Aura", "MSI Mystic Light" etc compatible. 

 

This means it does not have an ARGB header on the board at all. The ARGB controller is built into the case and you use the front LED controll button to cycle modes. 

image.png.fc6050ebad06a0497f73aeb50df257ad.png

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
7 hours ago, TVwazhere said:

This case is not compatible with motherboard software. You can tell because nowhere does it say "Asus Aura", "MSI Mystic Light" etc compatible. 

 

This means it does not have an ARGB header on the board at all. The ARGB controller is built into the case and you use the front LED controll button to cycle modes. 

image.png.fc6050ebad06a0497f73aeb50df257ad.png

im not really caring about Mystic Light and all for the case, but rather knowing if the LED button control header is a 3pin 5V or a 4pin 12V.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
15 hours ago, TheRCMGuy said:

im not really caring about Mystic Light and all for the case, but rather knowing if the LED button control header is a 3pin 5V or a 4pin 12V.

There isnt one. If there was, it would be a 3 pin 5V, as that's the only type ARGB headers come in (other than proprietary ones like Corsair, Lian Li or NZXT)

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×