Jump to content

My mini-ITX Build for gaming

PTGamer86
 Share
Posted
  • Author
4 minutes ago, Jurrunio said:

I'll stay on 3600MHz, personally might even try 3466 to see how well latency's gonna get.

 

Under DRAM settings pretty much all of them are better as the numbers get smaller, except tREFI which should go as high as possible. Of course, stress test every change or it would be hard to roll back.

Now i´m at 3600MHz with a CAS of 16.

 

16-20-20-40 ... what u think?

 

Sidenote: Is there any issue when my GPU isn´t at 97% usage in some games? I mean I know that Im playing at 1080p, but is that normal?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
8 minutes ago, PTGamer86 said:

16-20-20-40 ... what u think?

try go even lower?  Doubt if CAS 15 is stable, but still...

 

If it isn't, revert to CAS 16 and start lowering the next number.

 

8 minutes ago, PTGamer86 said:

Sidenote: Is there any issue when my GPU isn´t at 97% usage in some games?

It's normal, just a problem of math

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
45 minutes ago, Jurrunio said:

try go even lower?  Doubt if CAS 15 is stable, but still...

 

If it isn't, revert to CAS 16 and start lowering the next number.

 

It's normal, just a problem of math

CAS 15 won´t go lower.

So... should I try 16-18-18-38?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
4 minutes ago, PTGamer86 said:

CAS 15 won´t go lower.

So... should I try 16-18-18-38?

Sure, copying timings from higher rated kits isnt a bad idea. Might not get the most out of your kit but does save time.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
13 minutes ago, Jurrunio said:

Sure, copying timings from higher rated kits isnt a bad idea. Might not get the most out of your kit but does save time.

Well that wasn´t the idea to copy :P but since u are saying that haha gona try it, but I notice something, I get alote more shutter with CAS 16 in the game ? 

 

Testing now at: 18-18-18-38 (Stable for now) no shutter 

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Build Logs

×