Raijintek ENYO Modding.

[lolman9999]

Hi, I am going to do a new build soon (It will be over time, since I can not afford all these parts at the same time.

Ryzen 7 3700x

Asus ROG strix 2070 super

Asus ROG Crosshair VIII Hero (Wi-Fi)

etc...

However, I am using the Raijintek Enyo, which is an open air case. I am looking to mod in the following things. Are they easily possible?

• 5.25" Bays (Preferably good looking)
• An extra drive cage (Again, good looking)
• An extra motherboard tray for dual system (Maybe additional IO for this system)
• Passthrough quick disconnect fittings for easy disassembly, and extra passthroughs

This is my first water cooled build, so I am using quick disconnects and soft tubing to make it a nice clean first experience. All these things are redundant, except for the quick disconnects. Thanks for the help!

[W-L]

On 9/11/2019 at 9:40 PM, lolman9999 said:

Hi, I am going to do a new build soon (It will be over time, since I can not afford all these parts at the same time.

Ryzen 7 3700x

Asus ROG strix 2070 super

Asus ROG Crosshair VIII Hero (Wi-Fi)

etc...

However, I am using the Raijintek Enyo, which is an open air case. I am looking to mod in the following things. Are they easily possible?

• 5.25" Bays (Preferably good looking)
• An extra drive cage (Again, good looking)
• An extra motherboard tray for dual system (Maybe additional IO for this system)
• Passthrough quick disconnect fittings for easy disassembly, and extra passthroughs

This is my first water cooled build, so I am using quick disconnects and soft tubing to make it a nice clean first experience. All these things are redundant, except for the quick disconnects. Thanks for the help!

Anything is possible but it depends on how you want to implement add ons. As for the motherboard tray itself is is a single piece so you wouldn't be able to swap it out per say but looking at it's drawings you can re-arrange it in different layouts/orientations. 

 

For pass through or bulk head fittings you would be looking at something such as this:

https://www.ekwb.com/shop/ek-af-pass-through-g1-4-black

https://modmymods.com/barrow-g1-4-threaded-female-to-female-pass-through-fitting-black-tcdzs-v1.html

[thrasher_565]

On 9/11/2019 at 6:40 PM, lolman9999 said:

Hi, I am going to do a new build soon (It will be over time, since I can not afford all these parts at the same time.

Ryzen 7 3700x

Asus ROG strix 2070 super

Asus ROG Crosshair VIII Hero (Wi-Fi)

etc...

However, I am using the Raijintek Enyo, which is an open air case. I am looking to mod in the following things. Are they easily possible?

• 5.25" Bays (Preferably good looking)
• An extra drive cage (Again, good looking)
• An extra motherboard tray for dual system (Maybe additional IO for this system)
• Passthrough quick disconnect fittings for easy disassembly, and extra passthroughs

This is my first water cooled build, so I am using quick disconnects and soft tubing to make it a nice clean first experience. All these things are redundant, except for the quick disconnects. Thanks for the help!

looks like it has pass through holes( don't no if it comes with the bulkhead fittings thow) if your planing on adding another mb on the other side and it being an open case it be much easer to do on this case. should be a simple mod. same with an io for it to.  as for the 5.25 bay no one uses em but i guess you have a plan for it so you would need some cage for it. or make some shelf for it. more details on this would help were your planing to put it....

 

the other side is for the other pc builing a new system is fun to do but using 1 case can save money if done right.....my build was done wrong....