Jump to content

GPU Sag or no?

Venoms
By Venoms
in Graphics Cards
 Share
Go to solution Solved by -rascal-,

That is very minor GPU sag; you should be absolutely fine.

There will be some sort of sagging these days, especially with GPUs now using such big, dense, multi-slot coolers.

Posted

So I recently upgraded my GPU and I’m wondering if this is GPU sag or just my imagination. On a bubble level it shows that it’s slightly off but I’m wondering if it’s fine how the card is.

 

975F04E9-853D-42F8-8A09-75D8B205AA01.jpeg

884C7E3C-E348-4992-A157-44B174289A1D.jpeg

C7BA3CD5-E173-4D22-BCA5-A4B29A63F0C3.jpeg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution

That is very minor GPU sag; you should be absolutely fine.

There will be some sort of sagging these days, especially with GPUs now using such big, dense, multi-slot coolers.

Intel Z390 Rig ( *NEW* Primary )

Intel X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)

  • i7-8086K @ 5.1 GHz
  • Gigabyte Z390 Aorus Master
  • Sapphire NITRO+ RX 6800 XT S.E + EKwb Quantum Vector Full Cover Waterblock
  • 32GB G.Skill TridentZ DDR4-3000 CL14 @ DDR-3400 custom CL15 timings
  • SanDisk 480 GB SSD + 1TB Samsung 860 EVO +  500GB Samsung 980 + 1TB WD SN750
  • EVGA SuperNOVA 850W P2 + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL
  • Ekwb Custom loop + 2x EKwb Quantum Surface P360M Radiators
  • Logitech G502 Proteus Spectrum + Corsair K70 (Red LED, anodized black, Cheery MX Browns)

AMD Ryzen Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel Z97 Rig (Decomissioned)

  • Intel i5-4690K @ 4.8 GHz
  • ASUS ROG Maximus VII Hero Z97
  • Sapphire Vapor-X HD 7950 EVGA GTX 1070 SC Black Edition ACX 3.0
  • 20 GB (8GB X 2 + 4GB X 1) Corsair Vengeance DDR3 1600 MHz
  • Corsair A50 air cooler  NZXT X61
  • Crucial MX500 1TB SSD + SanDisk Ultra II 240GB SSD + WD Caviar Black 1TB HDD + Kingston V300 120GB SSD [non-gimped version]
  • Antec New TruePower 550W EVGA G2 650W + White CableMod cables
  • Cooler Master HAF 912 White NZXT S340 Elite w/ white LED stips

AMD 990FX Rig (Decommissioned)

  • FX-8350 @ 4.8 / 4.9 GHz (given up on the 5.0 / 5.1 GHz attempt)
  • ASUS ROG Crosshair V Formula 990FX
  • 12 GB (4 GB X 3) G.Skill RipJawsX DDR3 @ 1866 MHz
  • Sapphire Vapor-X HD 7970 + Sapphire Dual-X HD 7970 in Crossfire  Sapphire NITRO R9-Fury in Crossfire *NONE*
  • Thermaltake Frio w/ Cooler Master JetFlo's in push-pull
  • Samsung 850 EVO 500GB SSD + Kingston V300 120GB SSD + WD Caviar Black 1TB HDD
  • Corsair TX850 (ver.1)
  • Cooler Master HAF 932

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
19 minutes ago, -rascal- said:

That is very minor GPU sag; you should be absolutely fine.

There will be some sort of sagging these days, especially with GPUs now using such big, dense, multi-slot coolers.

Appreciate the reply, I moved from a GTX 1070 FE to this so even slight sag kinda freaked me out.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
10 minutes ago, Venoms said:

Appreciate the reply, I moved from a GTX 1070 FE to this so even slight sag kinda freaked me out.

Have you properly screwed the card to the case and locked it all the way in goodie? you're likely to be perfectly okay.

 

If it bothers you a raiser is always welcome, but I think it would only serve as peace of mind at most.

Personal Desktop":

CPU: Intel Core i7 10700K @5ghz |~| Cooling: bq! Dark Rock Pro 4 |~| MOBO: Gigabyte Z490UD ATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: RX 6900XT Sapphire Nitro+ |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.

Luna, the temporary Desktop:

CPU: AMD R9 7950XT  |~| Cooling: bq! Dark Rock 4 Pro |~| MOBO: Gigabyte Aorus Master |~| RAM: 32G Kingston HyperX |~| GPU: AMD Radeon RX 7900XTX (Reference) |~| PSU: Corsair HX1000 80+ Platinum |~| Windows Boot Drive: 2x 512GB (1TB total) Plextor SATA SSD (RAID0 volume) |~| Linux Boot Drive: 500GB Kingston A2000 |~| Storage: 4TB WD Black HDD |~| Case: Cooler Master Silencio S600 |~| Display 1 (leftmost): Eizo (unknown model) 1920x1080 IPS @ 60Hz|~| Display 2 (center): BenQ ZOWIE XL2540 1920x1080 TN @ 240Hz |~| Display 3 (rightmost): Wacom Cintiq Pro 24 3840x2160 IPS @ 60Hz 10-bit |~| OS: Windows 10 Pro (games / art) + Linux (distro: NixOS; programming and daily driver)
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
7 minutes ago, Princess Luna said:

Have you properly screwed the card to the case and locked it all the way in goodie? you're likely to be perfectly okay.

 

If it bothers you a raiser is always welcome, but I think it would only serve as peace of mind at most.

Yea I screwed both of the screws all the way in while supporting the card with my other hand.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×