Help pleasee

[IneedPCHELP]

I own a Gigabyte Z390 UD and it has a 4-pin and a 8- pin connector next to the 4-pin. My power supply is a 80+Gold Corsair 750x. It has a 2* 4 pin connector so like a 8 pin that can be divided into 2*4-pin. On the mother board the 4-pin is on the left and 8-pin on the right for your information. I don't know if i should only plug in the 4-pin on the left or only the 8-pin. OOOR both while using two psu cable and having a 4-pin just not being used

[Turtle Rig]

6 minutes ago, IneedPCHELP said:

I own a Gigabyte Z390 UD and it has a 4-pin and a 8- pin connector next to the 4-pin. My power supply is a 80+Gold Corsair 750x. It has a 2* 4 pin connector so like a 8 pin that can be divided into 2*4-pin. On the mother board the 4-pin is on the left and 8-pin on the right for your information. I don't know if i should only plug in the 4-pin on the left or only the 8-pin. OOOR both while using two psu cable and having a 4-pin just not being used

You connect both my friend.  Simple

[TMobile]

I am not sure, take a look at the manual for security sake. Buth afaik the 8 (4+4) is enough for normal use (no heavy ocing, or ocing an i9). The 4 pin is there to supply extra power if needed, but without oc you shouldn't need more than the 8 pin

[Herman Mcpootis]

You can just plug in the 8-pin and leave it at that.

[Oalei]

Well the thing is Im not sure the VRM is good enough to handle it if its really using 8+4pin.