NUC8I7HVK Raid issue

[Kruelty]

Just received a NUC8I7HVK and trying to install windows 10 on 2 XPG SX8200 Pro 1TB m.2 in raid 0. I can install to each individual drive no problem. I have followed all the steps to create the raid 0 drive in the bios/uefi. While in raid 0 the drives show up as a usable drive without installing any drivers but I get a error 0x80300002 when trying to install to the raid 0 drive. the error is about the partition not being accessible or corrupt. So I try to install the driver thinking maybe that would help. If I try to install the RST driver the system freezes during the driver installation. Any ideas or help would be greatly appreciated.

 

I have downloaded the rst drivers from the nuc website. 

[Kruelty]

Update. 

I have installed ADATA's ssd toolbox the only difference I can see between the 2 drives is the firmware version. However using the ssd toolbox to upgrade the firmware just takes me to ADATA's website. 

 

Would this have an effect on trying to raid the drives and one drive not working?

Does anybody know how to update the firmware on a ADATA XPG SX8200 Pro 1TB m.2?

[Kruelty]

Update. 2.0

 

Installed both drives into a laptop and installed windows 10  in raid 0 with no issues.

 

Assuming now the issue is with the NUC8I7HVK. One specific drive is failing the raid. Doesn't matter which slot it is in but it's only one drive failing the raid. 

 

Anybody have any suggestions? I have updated to the latest BIOS on the NUC.