Rx 590 fatboy overclock

[Ragepulse]

So I have an rx 590 fatboy that I decided to replace the thermal paste on. Normally they run 80-83c max load and 35-40c idle with zero rpm set to on with ambient temps around 21-23c. The compound I used was thermaltakes tg-7 which put idle temps to 28-29c with fan curve set to 35% at idle. I decided to take the core clock from 1580 to 1615@1.155 volts. Max load temps sit around 74c. Should I push it a little more?

[Origami Cactus]

Up to 90c is fine, so push it as far as you can.

[Ls_2011]

On 7/4/2019 at 8:16 PM, Origami Cactus said:

Up to 90c is fine, so push it as far as you can.

it only goes to 85c 

 

On 7/4/2019 at 8:05 PM, Ragepulse said:

So I have an rx 590 fatboy that I decided to replace the thermal paste on. Normally they run 80-83c max load and 35-40c idle with zero rpm set to on with ambient temps around 21-23c. The compound I used was thermaltakes tg-7 which put idle temps to 28-29c with fan curve set to 35% at idle. I decided to take the core clock from 1580 to 1615@1.155 volts. Max load temps sit around 74c. Should I push it a little more?

and push it until it gives you black screen artifacts etc.. don't worry about temp because if it's to it will lower the clocks automaticly from like 80c i noticed