sometimes pc wont post..

[NiiiKK.]

i had this issue before where i turn on the pc and everything turns on but there's no signal on monitor, no kbm or mouse.

but later it fixes by itself. now i got that problem again, i turn the pc on every morning, it works fine. i turn it off in evening

and try to turn on 2hrs later and it wont turn on. but it works next morning. but not it still wont work. i noticed this time that there's

ez debug light on vga

[pizapower]

Let me guess, you have an Asus motherboard?

[NiiiKK.]

1 minute ago, pizapower said:

Let me guess, you have an Asus motherboard?

Nope, MSI B450M Pro-VDH V2

[pizapower]

Is your system overclocked?

[NiiiKK.]

Just now, pizapower said:

Is your system overclocked?

No, i have my RAM a-xmp enabled tho

[Master Disaster]

Full system specs would be helpful.

[NiiiKK.]

1 minute ago, Master Disaster said:

Full system specs would be helpful.

MSI B450M Pro-VDH V2

RTX 2060 FE

Ryzen 5 2600

Corsair CX 2017 450W

ballastix sport lt 8x2 3000mhz

[pizapower]

Try to lower your RAM speed.

[NiiiKK.]

5 minutes ago, pizapower said:

Try to lower your RAM speed.

cant even get into bios

[pizapower]

Clear the CMOS, this will put your RAM to work @ 2133mhz.

[.Apex.]

1 hour ago, NiiiKK. said:

i had this issue before where i turn on the pc and everything turns on but there's no signal on monitor, no kbm or mouse.

but later it fixes by itself. now i got that problem again, i turn the pc on every morning, it works fine. i turn it off in evening

and try to turn on 2hrs later and it wont turn on. but it works next morning. but not it still wont work. i noticed this time that there's

ez debug light on vga 

while the light on the VGA is on, does unplugging your display cable to the GPU and replugging it help? (HDMI, Displayport, DVI, VGA)

[NiiiKK.]

3 minutes ago, _Syn_ said:

while the light on the VGA is on, does unplugging your display cable to the GPU and replugging it help? (HDMI, Displayport, DVI, VGA)

Nope

[.Apex.]

2 minutes ago, NiiiKK. said:

Nope

this is strange, it seems like the GPU fails to wake up, or more likely the motherboard fails to recognize it, try re-seating your GPU, but considering how cheap your motherboard is i wouldn't be surprised if it's the problem

[Mad153]

51 minutes ago, pizapower said:

Clear the CMOS, this will put your RAM to work @ 2133mhz.

Did this help?

[NiiiKK.]

Just now, Mad153 said:

Did this help?

the battery seems pretty hard to pull out, im kinda noob at this

[NiiiKK.]

3 hours ago, pizapower said:

Clear the CMOS, this will put your RAM to work @ 2133mhz.

 

2 hours ago, Mad153 said:

Did this help?

aight, i used a screwdriver for jumper and idk if it reset the cmos or not. i tried to tighten the wires and RAM.

turned it back on, it turned on and turned off itself several times. i turned off the switch and tried again later.

it turned on and off and on again and it stayed there, this time the led lights on DRAM and CPU.

[NiiiKK.]

aight i dont get this, i put the pc down and open it up. i removed the RAM sticks and put one and tried to turn it on. it worked. i put the second one and it worked aswell.

i put the lid on and put it back to where it was and now it shows VGA led and black screen. this freaking makes no sense

[NiiiKK.]

okay apparently the problem was the Pc standing still. i put the pc on sideways and now it works normally, im losin my brain cells

[NiiiKK.]

wellll now its back again, it worked fine yesterday and now this morning, its back to VGA led.

[NiiiKK.]

can a bad or dead CMOS battery cause this?