Jump to content

Is this considered normal??

Go to solution Solved by Livinloud,

it was reported incorrectly. HWMonitor is known to do that sometimes.

Hi guys, 

So I just notice something while looking at HWMonitor.

The max speeds of my stock 2600 is 4.2ghz and even one of them went up to 4.7.

 

I thought it's max boost was 3.9? Total noob here by the way. Is this normal? For Ryzen or CPUs in general to go waaaaaay above the supposed clock speeds?

 

Thanks in advance!

 

1744646390_4.7ghzcropped.png.17be14a9b1babc13cfb75b1813b33917.png

And here's the max voltage

390213552_Voltage(2).png.691e59c63456852b67b014717a620906.png

PC Specs:

CPU: R5 2600(OCd to 4ghz)  |  CPU cooler: Cooler Master Hyper 212 Black Edition  |  Mobo: Gigabyte B450 Aorus Pro Wifi  |  RAM: Corsair Vengeance LPX 16GB  3200mhz(White)  |  PSU: Cooler Master MWE 750w 80+gold  |  GPU: Gigabyte RTX 2060 Gaming OC 6GB  |  NVME: 970 Evo+ 250gb(OS)  |  SSD: 860 Evo 500gb(Games) , MX500 1TB(Games)  |  HDD: WD Blue 2TB 5400rpm(Mass storage device)  |  Case: NZXT H500(White)  |  Case fans: 2x140 Noctua NF-P14s redux-1500 PWM(Grey) , 1x120 Thermaltake Riing 12 series red led

 

Peripherals:

Headset: HyperX Cloud Core  |  Mouse: Logitech G502 Proteus Spectrum  |  Keyboard: Coolermaster MK750 CherryMX Red  |  Monitor: AOC G2590FX 25" Frameless Gaming Monitor

 

Link to comment
https://linustechtips.com/topic/1062901-is-this-considered-normal/
Share on other sites

Link to post
Share on other sites

it was reported incorrectly. HWMonitor is known to do that sometimes.

My Rig: CPU: i9-9900k (5Ghz), Ram: 32gigs 3600mhz DDR4 CL16, MOBO: Gigabyte Aorus z390 Ultra, HDD: Samsung 970 Evo 500gig x2, Samsung 850 evo 250 gig, 2 TB Baracuda 7200 rpm,6tb WD Black 7200rpm, 4TB NAS, GPU: Gigabyte Aorus 3090 Master

 

Link to post
Share on other sites

4.7GHz seems like a missreport to me

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to post
Share on other sites

14 minutes ago, Livinloud said:

it was reported incorrectly. HWMonitor is known to do that sometimes.

 

3 minutes ago, Bananasplit_00 said:

4.7GHz seems like a missreport to me

Thanks. That just made no sense to me when I saw it.

PC Specs:

CPU: R5 2600(OCd to 4ghz)  |  CPU cooler: Cooler Master Hyper 212 Black Edition  |  Mobo: Gigabyte B450 Aorus Pro Wifi  |  RAM: Corsair Vengeance LPX 16GB  3200mhz(White)  |  PSU: Cooler Master MWE 750w 80+gold  |  GPU: Gigabyte RTX 2060 Gaming OC 6GB  |  NVME: 970 Evo+ 250gb(OS)  |  SSD: 860 Evo 500gb(Games) , MX500 1TB(Games)  |  HDD: WD Blue 2TB 5400rpm(Mass storage device)  |  Case: NZXT H500(White)  |  Case fans: 2x140 Noctua NF-P14s redux-1500 PWM(Grey) , 1x120 Thermaltake Riing 12 series red led

 

Peripherals:

Headset: HyperX Cloud Core  |  Mouse: Logitech G502 Proteus Spectrum  |  Keyboard: Coolermaster MK750 CherryMX Red  |  Monitor: AOC G2590FX 25" Frameless Gaming Monitor

 

Link to post
Share on other sites

Use HWInfo. Not HWMonitor.. Check off 'Sensors Only' when you go to run the program, though..

Ryzen 3800X + MEG ACE w/ Radeon VII + 3733 c14 Trident Z RGB in a Custom Loop powered by Seasonic Prime Ultra Titanium
PSU Tier List | Motherboard Tier List | My Build

Link to post
Share on other sites

1 hour ago, ch3w2oy said:

Use HWInfo. Not HWMonitor.. Check off 'Sensors Only' when you go to run the program, though..

Thanks, I'll try that out instead of HWMonitor.

PC Specs:

CPU: R5 2600(OCd to 4ghz)  |  CPU cooler: Cooler Master Hyper 212 Black Edition  |  Mobo: Gigabyte B450 Aorus Pro Wifi  |  RAM: Corsair Vengeance LPX 16GB  3200mhz(White)  |  PSU: Cooler Master MWE 750w 80+gold  |  GPU: Gigabyte RTX 2060 Gaming OC 6GB  |  NVME: 970 Evo+ 250gb(OS)  |  SSD: 860 Evo 500gb(Games) , MX500 1TB(Games)  |  HDD: WD Blue 2TB 5400rpm(Mass storage device)  |  Case: NZXT H500(White)  |  Case fans: 2x140 Noctua NF-P14s redux-1500 PWM(Grey) , 1x120 Thermaltake Riing 12 series red led

 

Peripherals:

Headset: HyperX Cloud Core  |  Mouse: Logitech G502 Proteus Spectrum  |  Keyboard: Coolermaster MK750 CherryMX Red  |  Monitor: AOC G2590FX 25" Frameless Gaming Monitor

 

Link to post
Share on other sites

7 minutes ago, David_Kwan said:

Thanks, I'll try that out instead of HWMonitor.

It's way more accurate and widely used on this forum as well as everywhere else.. I used HWMonitor first myself until I noticed what you noticed.. 

Ryzen 3800X + MEG ACE w/ Radeon VII + 3733 c14 Trident Z RGB in a Custom Loop powered by Seasonic Prime Ultra Titanium
PSU Tier List | Motherboard Tier List | My Build

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×