3600mhz XMP not posting

[thematt]

Hey guys I have a 9900k and a Aorus pro mobo.

 

i just bought today some g.skill trident z 16gb 3600mhz ram I went into my bios as advised and when in XMP the pc won’t boot. The lights behind  the ram come on and the RGB but

no post. The XMP is setting the V to 1.35 idk if this enough or what’s the problem the ram works fine when not in XMP in dual channel. Can someone help this.

[nick name]

Is the RAM installed in the slots the manual instructs to use?

[thematt]

1 minute ago, nick name said:

Is the RAM installed in the slots the manual instructs to use?

Yes my other ram worked fine. It’s in A1 and B1 as recommend 

[Stormseeker9]

5 minutes ago, thematt said:

Yes my other ram worked fine. It’s in A1 and B1 as recommend 

If you try 3200 or 3400 does it boot ?

[nick name]

How old is the BIOS on your board?

[thematt]

5 minutes ago, Stormseeker9 said:

If you try 3200 or 3400 does it boot ?

If I set it to 3500 or 3400 and V to 1.35 it comes on black screen after a 1 minute or so boot loops then loads me to the bios with Boot failure detected  

 

[thematt]

4 minutes ago, nick name said:

How old is the BIOS on your board?

Here 

[thematt]

9 minutes ago, Stormseeker9 said:

If you try 3200 or 3400 does it boot ?

This is it when it loads none xmp 

[thematt]

Can anyone else help with this 

[Stormseeker9]

1 hour ago, thematt said:

This is it when it loads none xmp 

That’s weird seems looks like the ram is running at 2099.6mhz  

 

what exact aurus pro pro board do you have ?