server psu Server PSU to atx

[Tinker]

I am interested in converting an old server case to accept an atx motherboard
The case is hstns-2116

with 2 850W psu’s with psu backplane.

The psu’s themselves don’t have any wires coming off them but the backplane does there is 3 bunches of cables coming off them.
1 at 18 pins (P1)
1 at 22 pins (P2)
1 at 10 pins (P3)

The main objective is to use an atx mainboard in it and be able to keep the redundancy of 2 psu’s.

for the main reason I have it so why not make use of it.

[Stefan Payne]

6 minutes ago, Tinker said:

I am interested in converting an old server case to accept an atx motherboard

Not possible as they don't have the needed voltages.

 

The -12V is irrelevant. +12V a bit high but should be fine.

3,3V you have and could work with, the 8A are OKish for most systems.
But you need to get 5V somewhere - and that the PSU does not have.

[Tinker]

Extra info I took a look at the backplane
On the left (From left to right)
x1 Purple - 5vaux
x2 White  - 3.3vaux
X1 Slim yellow - N12v
X2 yellow /Black stripe - SB_return
X3 yellow /Blue stripe - +12V1
X7 Black - Gnd
X6 Light brown - 3.3v

On centre
X1 Light brown - 3.3v
X3 Orange - +12v3
X3 Red /White stripe
X2 Light brown /White stripe +12v2
X2 Slim Dark brown /White stripe +12v2
X2 Dark pink - +5V
X6 Slim red +5v
X17 Black - Gnd

 

thanks in advance for any help

[Xorius]

I know this is an old thread but I think that OP might be interested in