Jump to content

Just changed from Nvidia to AMD and now there's no display. Help!

BlitZerWolf2861
By BlitZerWolf2861
in Graphics Cards
 Share
Go to solution Solved by immaguy1234,
2 minutes ago, BlitZerWolf2861 said:

White. It's always white. As for the bios, how? 

1) Unplug all the components and devices on the MB, and then reinstall the CPU,­RAM (one piece), VGA card and power supp­ly only.Please add some thermal gel on the CPU, and then rei­nstall the CPU fan correctly and tightly­.Be sure JPWR1 and JPWR2 are connected to proper ATX power supplies to ensure st­able operation of the motherboard. If th­ere are 6 pin or 8 pin Power Connectors on your VGA,please make sure they are co­nnected to power sup­ply。

2) Clear CMOS (How to clear CMOS, you could refer to the ma­nual)for a try. 

3) If the problem still persists, please change the RAM wi­th different RAM slot to check again.

or 5) change the HDMI cable

or 6) spam reset until it goes into BIOS

Posted
1 minute ago, BlitZerWolf2861 said:

Nothing at all. Here's a pic. Hdmi's plugged in the front

1544802738474251592116.jpg

Can you post a pic of your whole system? That might help us a little more

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Klemmbrett said:

Well any chance you can get your hands on a friends 900 series or newer card which will work with ur current drivers ? But also you should be able to boot with VGA driver by one or the other way. And that are such baisc drivers that they run on everything. And did you buy a new 570 ? Are we sure that the card works to beginn with can u try it in another system ?

I got it from a friend. He quit gaming. So yeah it works. I don't have a vga cable. And none of my friends have any available cards rn 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, BlitZerWolf2861 said:

I got it from a friend. He quit gaming. So yeah it works. I don't have a vga cable. And none of my friends have any available cards rn 

VGA output mode not actual VGA its like a fallback.  As mentioned now by someone else and me try to clear your CMOS. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Klemmbrett said:

VGA output mode not actual VGA its like a fallback.  As mentioned now by someone else and me try to clear your CMOS. 

Okay 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
7 minutes ago, immaguy1234 said:

Can you post a pic of your whole system? That might help us a little more

 

15448033580922021953240.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
6 minutes ago, Klemmbrett said:

VGA output mode not actual VGA its like a fallback.  As mentioned now by someone else and me try to clear your CMOS. 

Reset the battery, jumped the jbat thing. Still nothing. Now it just turns on, off for a couple seconds and back on into nothing. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, BlitZerWolf2861 said:

Reset the battery, jumped the jbat thing. Still nothing. Now it just turns on, off for a couple seconds and back on into nothing. 

pull the gpu out and see if the motherboard POSTs

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, BlitZerWolf2861 said:

Reset the battery, jumped the jbat thing. Still nothing. Now it just turns on, off for a couple seconds and back on into nothing. 

JBAT ?  Does the screen turn on ? can you press some key to go into bios or advanced boot options. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Klemmbrett said:

JBAT ?  Does the screen turn on ? can you press some key to go into bios or advanced boot options. 

The screen is totally blank. I can't see anything 

 

4 minutes ago, immaguy1234 said:

pull the gpu out and see if the motherboard POSTs

I don't have a speaker 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, BlitZerWolf2861 said:

The screen is totally blank. I can't see anything 

 

I don't have a speaker 

the motherboard should have a light that either goes from orange to white(if post is successful) or from orange to green

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, BlitZerWolf2861 said:

I don't have a speaker 

 

2 minutes ago, BlitZerWolf2861 said:

The screen is totally blank. I can't see anything 

Your motherboard has a tiny speaker that would BEEP codes that you can look up in your mobo manual.

No dot, or Background lighting so it does not turn on(usually it goes from orange to blue) so standby to on.    

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, immaguy1234 said:

the motherboard should have a light that either goes from orange to white(if post is successful) or from orange to green

The only light I see is the rgb mystic light. The ez debug doesn't show 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Klemmbrett said:

 

Your motherboard has a tiny speaker that would BEEP codes that you can look up in your mobo manual.

No dot, or Background lighting so it does not turn on(usually it goes from orange to blue) so standby to on.    

 

2 minutes ago, immaguy1234 said:

the motherboard should have a light that either goes from orange to white(if post is successful) or from orange to green

OK the ez debug finally came on. It's says VGA

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, BlitZerWolf2861 said:

 

OK the ez debug finally came on. It's says VGA

What color is the VGA led? Also try to update the BIOS if you can

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, immaguy1234 said:

What color is the VGA led? Also try to update the BIOS if you can

White. It's always white. As for the bios, how? 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution
2 minutes ago, BlitZerWolf2861 said:

White. It's always white. As for the bios, how? 

1) Unplug all the components and devices on the MB, and then reinstall the CPU,­RAM (one piece), VGA card and power supp­ly only.Please add some thermal gel on the CPU, and then rei­nstall the CPU fan correctly and tightly­.Be sure JPWR1 and JPWR2 are connected to proper ATX power supplies to ensure st­able operation of the motherboard. If th­ere are 6 pin or 8 pin Power Connectors on your VGA,please make sure they are co­nnected to power sup­ply。

2) Clear CMOS (How to clear CMOS, you could refer to the ma­nual)for a try. 

3) If the problem still persists, please change the RAM wi­th different RAM slot to check again.

or 5) change the HDMI cable

or 6) spam reset until it goes into BIOS

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 minutes ago, immaguy1234 said:

1) Unplug all the components and devices on the MB, and then reinstall the CPU,­RAM (one piece), VGA card and power supp­ly only.Please add some thermal gel on the CPU, and then rei­nstall the CPU fan correctly and tightly­.Be sure JPWR1 and JPWR2 are connected to proper ATX power supplies to ensure st­able operation of the motherboard. If th­ere are 6 pin or 8 pin Power Connectors on your VGA,please make sure they are co­nnected to power sup­ply。

2) Clear CMOS (How to clear CMOS, you could refer to the ma­nual)for a try. 

3) If the problem still persists, please change the RAM wi­th different RAM slot to check again.

or 5) change the HDMI cable

or 6) spam reset until it goes into BIOS

Spam reset? 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, BlitZerWolf2861 said:

Spam reset? 

keep pressing the reset button on your case (if you have one)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, immaguy1234 said:

keep pressing the reset button on your case (if you have one)

I don't 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, BlitZerWolf2861 said:

Ez debug says BOO

BOO or BOOT? if BOOT, then its your SSD/HDD

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, immaguy1234 said:

BOO or BOOT? if BOOT, then its your SSD/HDD

There are only 3 letters. As for my hdd, do I only fix the boot drive

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, BlitZerWolf2861 said:

There are only 3 letters. As for my hdd, do I only fix the boot drive

Yeah, if the error is now BOO, then it's your storage

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×