Is there diffrences in this loop list?

[patriciadiaz1919]

I pick a silent loop x399 as I don't really overclock as may do streaming games and work rendering other things that will use fully all cores as i hope it enough to keep it cool and silent as i am gonna use full system silent wing 3 140 medium fans from be quiet too and i am gonna use Koolance LIQ 702  Liquid Coolant, High-Performance, Colorless, 700ml  too.

Tubes are there many type of hard tubing as i want to do clean look as jay2cents say glassly one it better as it won't stain loop over time.

 

Does matter to push allot air with big rpm speeds or using little as 500?

 

Is there differences pump and water tube combo vs single pieces set?

 

Is bigger better as 800ml to 300ml will any happen to add more or less water?

 

https://www.ekwb.com/custom-loop-configurator/shared/oW5bfcd8bd40e34

[W-L]

2 minutes ago, patriciadiaz1919 said:

-SNIP-

For fans what you are looking for is high static pressure and low operating noise for silence while balancing the FPI of the rad as higher FPI requires more RPM to force the air through it. 

 

As for your res and pump unit having them separate or together is just a matter of preference and space, similarly with a larger res where it makes little difference unless you went with an ultra small and compact unit which is a little more hassle when filling and bleeding. 

[patriciadiaz1919]

3 minutes ago, W-L said:

For fans what you are looking for is high static pressure and low operating noise for silence while balancing the FPI of the rad as higher FPI requires more RPM to force the air through it. 

 

As for your res and pump unit having them separate or together is just a matter of preference and space, similarly with a larger res where it makes little difference unless you went with an ultra small and compact unit which is a little more hassle when filling and bleeding. 

I got this list fans i am looking at?

https://www.bequiet.com/en/casefans/264

 

https://www.bequiet.com/en/casefans/717

 

https://www.corsair.com/us/en/LED-Color/ml-pro-rgb-config/p/CO-9050078-WW

[W-L]

23 minutes ago, patriciadiaz1919 said:

I got this list fans i am looking at?

https://www.bequiet.com/en/casefans/264

 

https://www.bequiet.com/en/casefans/717

 

https://www.corsair.com/us/en/LED-Color/ml-pro-rgb-config/p/CO-9050078-WW

The silent wings 3 and Corsair ML’s would do the best for that application.

[patriciadiaz1919]

What about full load doesn't silent wing 3 make less noise or are they equal?

[W-L]

10 hours ago, patriciadiaz1919 said:

What about full load doesn't silent wing 3 make less noise or are they equal?

If you are going for silent operation you would never run them at full load. Almost all fans will have some airflow noise at full power. Personally I have an excess of rad space in my loop and keep my fans under 750RPM even under full load to keep it nice and quiet.

[patriciadiaz1919]

On 11/27/2018 at 11:11 AM, W-L said:

If you are going for silent operation you would never run them at full load. Almost all fans will have some airflow noise at full power. Personally I have an excess of rad space in my loop and keep my fans under 750RPM even under full load to keep it nice and quiet.

it kinda hard pick as be quiet promise silent wing 3 or ml140 PWM Premium Magnetic Levitation rbg

Is there big differences of both fans?

[W-L]

3 hours ago, patriciadiaz1919 said:

it kinda hard pick as be quiet promise silent wing 3 or ml140 PWM Premium Magnetic Levitation rbg

Is there big differences of both fans?

If you're looking for RGB you have your answer but between the two both are excellent fans for use on a radiator or heatsink. 

[patriciadiaz1919]

Are all be quiet fans static too?

[W-L]

3 hours ago, patriciadiaz1919 said:

Are all be quiet fans static too?

No depends on the fan, for static pressure as said the Silent Wings 3 would be your better option.