Chain BSOD on 2 day old build - Windows 10

[AndyC88]

Good evening,

 

So on Friday I finished my new PC build - 

 

i7-6600K @ 4.0Ghz

Maximus VIII Hero MB

Palint GTX 1080 Game Rock Premium 

16GB DDR4 RAM

 

and a fresh copy of Windows 10 and all was well - I played to my hearts content for two days, until today.

 

I moved the PC very carefully up to its permanent location in my office, plugged in my Logitech 5.1 system into the motherboard and booted up the PC. All was well for half an hour and since then I have had no less than 11 BSOD's and following a full Windows reinstall another 11. 

 

I am at my wits end - I've followed every thread on google that I can keep up with and still the problem persists. 

It seems to be that when I push the PC i.e multiple chrome tabs with FB/youtube or try and load a game (Chrome btw is crashing alot, showing the oops error screen and just disappearing as well) that the PC will fail and show one of the following error screens. 

 

Bugcheck code: 0xA (0xFFFFFFFFFFFFFF89, 0x2, 0x1, 0xFFFFF800F3EAA1B9)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
 

This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0xA (0xFFFFFFFFFFFFFF89, 0x2, 0x1, 0xFFFFF800F3EAA1B9)
Error: IRQL_NOT_LESS_OR_EQUAL
 

Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF8006C74159D, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\drivers\netio.sys
 

Bugcheck code: 0x3B (0xC0000005, 0xFFFFF8086284537C, 0xFFFFCC016A23B9B0, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\drivers\ntfs.sys
 

Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF804343A1BEB, 0x0, 0xFFFFFFFFFFFFFFFF)
Error: KMODE_EXCEPTION_NOT_HANDLED
file path: C:\Windows\system32\drivers\wpprecorder.sys
 

These are but a selection of the many BSOD's which I have experience today - I have since activated full memory dump data so that I can post it should the issue continue or someone can give me a heads up on the possible fault. 

 

Any help would be much appreciated - I'm truly struggling. 

Cheers

[burnttoastnice]

Have you overclocked? Temporarily go back to stock and see if you have the same BSOD issues. Also, run memtest86 on your RAM to make sure that's all in good order. From what I can see you're getting a variety of BSODs so it's definitely not a driver issue.

 

**Edited:

From what I can see I think there's something wrong with your paging file. Try disabling it, since you have a large amount of RAM.

[Gonio]

All up to date? Temps etc good?

[AndyC88]

25 minutes ago, burnttoastnice said:

Have you overclocked? Temporarily go back to stock and see if you have the same BSOD issues. Also, run memtest86 on your RAM to make sure that's all in good order. From what I can see you're getting a variety of BSODs so it's definitely not a driver issue.

 

**Edited:

From what I can see I think there's something wrong with your paging file. Try disabling it, since you have a large amount of RAM.

I was overclocked (CPU) the two days the system operated correctly - since the failures today I went back to stock settings. 

 

I've disabled the paging file - I'll get back to you with an update as soon as I can. 

[AndyC88]

18 minutes ago, Gonio said:

All up to date? Temps etc good?

As far as I can tell and having ran a driver check everything is up to date.

 

The temps are all within expected ranges - nothing to cause concern or draw the problem solving in that direction.