Sealance

Well, a temporary "fix" was to just disable all the interfaces that are not in use.

I'm having an issue with pfsense. Whenever I download some bigger files the DNS stops responding and I need to restart the macine. It's running the latest pfsense build. I had a similar issue in 2.6 when downloading but it dns would start responding again after a heavy download finished. Machine is an AM1 5150, 12Gb DDR3, two nics (1x dual port 1x quad port) I'm considering doing a fresh install if I messed up any setting.

That's about what I paid for my current 3060 8gb (~2500 SEK). Granted, it was on sale but they do pop up from time to time. I paid something similar for my 2060 right before the cough cough but that now sits in my streaming pc.

This seems to be the cheapest available replacement panel, in regards to shipping. https://www.dhgate.com/product/original-auo-screen-m270dan08-0-27-resolution/793536449.html not sure if moms (swedish VAT) is included in that price but at least its shipped by DHL.

Hence why I ask I'm asking if I can, not if i should I'm more worried about the postal service mangling it than me breaking it

So, I got a free Acer XB273UGX with a busted panel. Can I replace the AUO m270dan08.0 panel with a cheaper alternative (my capture card only does 144hz)? Is it worth replacing the panel or do I just scrap it for spare parts?

Running at the monitors preferred resolution will, depending on the games you run, lower your performance because it is higher resolution than your old monitor.

Valorant ran fine on my W3680. I did have a gtx970 in it though

It's a kvr21s15d8/16 stick. and no, no ram soldered onto the mainboard.

I'm troubleshooting an 840 g3 which displays the following symptoms Powers on Screen remains off Fans ramp up from slow to full bore External screen (connected via vga) doesn't show anything Doesn't appear to boot It has one stick of 16gb ddr4 (dont' have any other laptop with ddr4 to test the so-dimm in), I tried swapping between dimm1 and 2 slots. Starting the laptop without any ram yields the same results as listed above. Win+P or Fn+F4 didn't do anything. I tried unlugging the main battery and the cmos battery but still doesn't boot. Am I looking at a defective mainboard and/or something else?

My old Syncmaster 193T would do that, but it's an old panel with 25ms response time

So I picked up an Elgato 4k60 pro mk2. It's detected by windows but as soon as I try using it, nothing. It's not detected as a display in my gaming pc. OBS just says "no signal" and the 4k capture utility shows "No EDID. Reboot computer". I tried the included hdmi cable and plugging it into the gpu in my streaming pc, and passthrough to the monitor, still nothing. Firmware shows 00.00 and upon checking elgatos pages, they state "DO NOT FLASH". Any suggestions? My gaming monitor (1440p korean no-name) is using dvi so the capture card is connected to the hdmi port on my rtx 2060

Does your motherboard have enough pcie lanes or is the nvme using the same lanes as the slot you plugged the card into?

So I picked up this cheap Tobii 4c eye tracker but I'm having issues getting it to work. The core package stalls at 83% when I install it on my streaming pc (Win10N) wether or not it's plugged in (tried both powered usb hub and directly into a usb3 connector). It's just detected as a webcam and refuses to update the drivers. Tobii ghost doesn't detect any trackers.