Jump to content

MoonlightSylv

Member
  • Posts

    5,136
  • Joined

  • Last visited

Everything posted by MoonlightSylv

  1. I'm going to run memtest86 overnight. I'll see if anything comes up. Thanks for your help and goodnight.
  2. I found that 2/4 of the BSODs were associated with a driver. The first one being amdppm.sys (IRQL_NOT_LESS_OR_EQUAL) and the second one being wdf01000.sys (KMODE_EXCEPTION_NOT_HANDLED). Researching both of these shows that a common cause between the 2 is memory or drivers. Which makes me think that at least this part of it is memory related. However it does work on BIOS 2605 and I'm not sure if this is tied to the issue with BDO. I may try to borrow a set of memory from someone to test and see if I need to buy a new kit that's listed on the QVL.
  3. My bad, I forgot I didn't have a signature anymore. Ryzen 5 3600 16GB Team group TFORCE DDR4-3000 ASUS STRIX B450F GAMING Zotac GTX 1080 AMP Extreme EVGA GS650w Less important specs on profile BSODs had a couple different messages, if I recall correctly IRQ_NOT_LESS_OR_EQUAL was the most common one. I think there were a couple driver related ones but I can't think of what driver would be interfering with anything considering they are all up to date including the chipset driver. Edit: I will check logs in a moment when I get back to my PC
  4. I have had a problem for a while where if I played BDO on high settings, within about an hour or so of play, my computer's video will freeze (audio still plays normally from what I can tell) for a couple seconds and then come back. The game will either crash after that or start running again but at a lower (but not under 60) framerate. This isn't vsync doing its thing either since I have a 165hz monitor. But the fps part doesn't matter much. I'm trying to figure out the source of the problem. At first I thought it might be my GTX 1080's vram since it started happening around the time of a failed vram overclock that resulted in me needing to hit the reset button but now I'm not too sure. I've tried (and am still trying) to stress test the vram with OCCT and it hasn't had any errors. I've tried running benchmarks like unigen superposition without issue as well. But I'm not completely eliminating my card as the source of the problem because it seems to be video related. Another thing I can think of would be my RAM which isn't actually on the QVL for my motherboard, but it seems to run just fine. I haven't ran a memory test for longer than 30 minutes though and there's another thing that makes me suspect it's memory related. Whenever I update my boards BIOS to ANYTHING past version 2605 I get unbearable BSODs that occur anywhere from right when you log in, to about 5-10 minutes later. Meaning I can't test newer versions of the BIOS to see if that's the problem because it just ends up BSODing before I can see if any freezes happen. I've also tried downclocking my memory from 3200 to its 3000mhz stock clockspeed with no success. The last thing that I haven't 100% eliminated is if it's a software problem. I've reinstalled Windows and used different video drivers and all that but I haven't actually reinstalled bdo from nothing, I just transferred it to and from my hard drive before reinstalling Windows. However I have cleared any temp/cache/userdata and verified files on steam several times. If anyone has any ideas of what might be going on with BDO or the BIOS BSODs your insight will be appreciated.
  5. 32in curved 1440p 165hz is incrediblewdcrly5qewd-PNXxHzwKoTRGzVKxj-axhgAo-QP7ZOt8m_u9-wBl90bPCdZXrRnsWC-V-ghUEuNT2CRHsD7Asur01k5wTBMgvkjSac-fCeTU6WSyNAGgZm0o7uDx_qyjJcDqBAbkqJd_3qokPjYsHtpKhhkpkCEqFrxjLgL-N8AJN3VdOdOIW5dLy8q4YNu7lAwrE-ciUUVDFECwQEdI9VD7B4EExkz3sKnohaFxPIpZDW6ylVLpVvWkn2bgwwtbjSLu8CuM4IgSqzo8f8tDgiBeXjO15xWpHyYrWXf9F1F6eALe7Tz8SdnSzUZf5YSnPH03vEPxwEHF5CrvH1LAgyF-OwVZQ8mD9OefZfZkuW3bjfeuqcp3FCpSaHq_GHZCEX9dOc0j_XuRB6ZJl3dLw_tirr-qqPo_cxB0qzxKV8oZmhu8w36NQqmRvOGOUamVMueSrVWsm2chYMWQU04XFqTIMmCHa5I8vLGGEemlU8eWpQjIzYzRpcRWi0i1iilQ2WWLGGqmRmPfeMv7JLmQXbrt3BSO5JOGu1vLis96u0f4qGXChutYDUoCqW0DHQxQpiUgUsJPl_09KRDplOkUCrI5UYv5WaEiHF_6EeoK1SFtPGOi8elav6qQLt7pnfcvNqEbcBo7TYJMwCF2gfdVdQ_qmfISQDLY6JukT0IEzHXmU2kU88WSpkKb8byaug=w1786-h1339-no?authuser=0

  6. Ampere looks hot (but not literally)

  7. The value of the 3070 seems great and I plan on upgrading sometime around Christmas or earlier. Would I need to get a higher wattage power supply as well? I've heard ampere has some high power draw.
  8. MoonlightSylv

    Robot Monday as promised After sending him off…

    This was a pain in the ass
  9. Robot Monday as promised

    After sending him off to a repair service, I got him back with the problems I had fixed, but an entirely new problem (shown in spoiler) where his position sensor for the torso wasn't working. Turns out the guy who repaired it plugged in the torso motor backwards?? And he didn't know that until I figured it out on my own. The repair service was a nightmare but he's working now so I'm happy.

    Spoiler

    Initial problem (bad wires and stripped neck gear):

     

    Problem after getting it back from repair:

     

     

    Pic from my repair, with the backwards wires circled: 

     

    671329116_IMG_20200622_1912152.thumb.jpg.4aece6ec124c44aafdbf9c4404cf3eba.jpg

     

    1. MoonlightSylv

      MoonlightSylv

      This was a pain in the ass

    2. Jtalk4456
  10. we out here slapping macOS on spare computers

    910972353_ScreenShot2020-06-16at2_49_32AM.thumb.png.a039fde320b51889de2a23d12474c0b6.png

  11. MoonlightSylv

    I wish I could still use Windows 7

    I wish I could run Windows 7 without worrying about the consequences that running it in 2020 has.
  12. I wish I could still use Windows 7

    1. MoonlightSylv

      MoonlightSylv

      I wish I could run Windows 7 without worrying about the consequences that running it in 2020 has.

  13. MoonlightSylv

    who is everyone now i haven't been here since j…

    Oh nice, DP shai is a viable build.
  14. MoonlightSylv

    who is everyone now i haven't been here since j…

    @Cyberspirit Big grinder and PVPer, I main Awakened DK 287ap/289aap/316dp. I haven't really tried lifeskilling much but it seems really profitable.
  15. MoonlightSylv

    who is everyone now i haven't been here since j…

    @Cyberspirit oh shit you play bdo too? I've been at that game for a long time
  16. who is everyone now i haven't been here since july 2019

    1.   Show previous replies  6 more
    2. MoonlightSylv

      MoonlightSylv

      @Cyberspirit Big grinder and PVPer, I main Awakened DK 287ap/289aap/316dp. I haven't really tried lifeskilling much but it seems really profitable.

    3. Cyberspirit

      Cyberspirit

      It is profitable and fun but a lot of people find it boring. I usually butcher, cook and barter but one of these days i'd like to try grinding.

      I'm currently building up a DP build on my Shai for fun.

    4. MoonlightSylv

      MoonlightSylv

      Oh nice, DP shai is a viable build.

  17. Got another fokin robot incoming, he's a big 'un too.

  18. MoonlightSylv

    thicc

    @Ashiella Good thing this is not one of those then
  19. MoonlightSylv

    thicc

    Max temps down from 79~c to 60c Average around 50c
    1.   Show previous replies  3 more
    2. Skanky Sylveon

      Skanky Sylveon

      @Ashiella Comfired to be blind.

    3. Ashiella

      Ashiella

      @Skanky Sylveon I'm just stating my hatred for AIO's and am relishing the fact Sylvie doesnt have one

    4. Skanky Sylveon

      Skanky Sylveon

      @Ashiella Could have made that much clearer.

×