-
Posts
402 -
Joined
-
Last visited
Reputation Activity
-
HectiKCookiE got a reaction from Jumper118 in Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**
Bored at TAFE here's the score for dell pre-built computers we use!
-
HectiKCookiE got a reaction from iamdarkyoshi in Ugliest Tech Ever
am i the only one that thinks these look the same
-
HectiKCookiE got a reaction from mightybiscuit13 in Scrapyard Wars Season 4 - What would you like to see?
I think that would be really boring to watch, but hey that just my opinion.
-
HectiKCookiE reacted to ThatOneRussian in How To Make Custom Tomato Router Theme?
http://www.jamieoliver.com/recipes/vegetables-recipes/the-quickest-tomato-sauce/
you're welcome
-
-
-
HectiKCookiE got a reaction from TakeruKatsumi in New build will not display on monitor after I powered it down
yeah its really annoying, it might be you video cable(s) cause my PC started doing as soon as i brought a longer cable but anyway i really don't know what causes it
-
HectiKCookiE got a reaction from 79wjd in What is this France stuff every where?
to all the people saying i live under a rock may i remind you of fallout 4 since the release day i have played over 65 hrs of fallout so i may have missed a couple of things
-
HectiKCookiE got a reaction from Sithhy in OMG ME SO HAPPY!
I just ordered 7 of the LTT Edition Noctua NF-F12 Fans!
Thank you Linus!!!
-
HectiKCookiE reacted to Andrew Storlie in What are those for on my msi 980 ti
How are you building a computer with a 980ti and dont know what sli fingers are?
-
HectiKCookiE got a reaction from DKL in Scrapyard Wars Season 4 - What would you like to see?
I think that would be really boring to watch, but hey that just my opinion.
-
HectiKCookiE got a reaction from Snickerzz in Another free steam key
Citizens of earth
9LZIB-6Q8TZ-RXT3Z
-
-
-
HectiKCookiE reacted to xTrixieHD in LTT Noctua Fans In Australia
Linus is a pretty fucking special guy
-
HectiKCookiE got a reaction from farhanorakzai in OMG ME SO HAPPY!
I just ordered 7 of the LTT Edition Noctua NF-F12 Fans!
Thank you Linus!!!
-
HectiKCookiE got a reaction from Tedster in OMG ME SO HAPPY!
I just ordered 7 of the LTT Edition Noctua NF-F12 Fans!
Thank you Linus!!!
-
HectiKCookiE got a reaction from thenotoriousone in Mobo getting stuck on stupid led codes
So I took it to the shop and... It booted fine! Took it home it worked fine over hdmi then tried display port and it stops working it didn't take me long to figure out the display port on my card was bad, so I swapped the top and bottom cards around and boom all fixed. Now I can play fallout 4 on launch day!
-
HectiKCookiE reacted to SilicateWielder in Samsung UD590 4K No Vesa Mount? No Problem!
My friend, i may not be op. but I would never trust a 3D printed object to be able support the weight of a monitor while wall mounted.
I'd rather CNC a hunk of metal into what I need.
-
HectiKCookiE got a reaction from stconquest in Samsung UD590 4K No Vesa Mount? No Problem!
So my room/boy cave is looking pretty well crap, all messy and beat up so im gonna do some stuff to make it look pretty nice like new bed, desk, speakers, paint wall, etc. so i picked something easy and cheap to start with, hey why not wall mount my Samsung 28" 4K display? oh that's right its not vesa mount compatible (or any mount for that matter) so i took apart the stand to see how i could mount it and found... not much just a crappy little tongue with a square hole in it. so i thought about it for a while and worked out the easiest way to do it, a block of alloy and a piece of flat bar stainless. Blah Blah Blah Bla, i doubt any one reads this anyway so ill just post some pics. plus im getting bored so no more typing! P.S I know they cables look bad but im getting some stuff so i can put them in the wall tomorrow!
-
HectiKCookiE got a reaction from ClownFace1511 in Samsung UD590 4K No Vesa Mount? No Problem!
So my room/boy cave is looking pretty well crap, all messy and beat up so im gonna do some stuff to make it look pretty nice like new bed, desk, speakers, paint wall, etc. so i picked something easy and cheap to start with, hey why not wall mount my Samsung 28" 4K display? oh that's right its not vesa mount compatible (or any mount for that matter) so i took apart the stand to see how i could mount it and found... not much just a crappy little tongue with a square hole in it. so i thought about it for a while and worked out the easiest way to do it, a block of alloy and a piece of flat bar stainless. Blah Blah Blah Bla, i doubt any one reads this anyway so ill just post some pics. plus im getting bored so no more typing! P.S I know they cables look bad but im getting some stuff so i can put them in the wall tomorrow!
-
HectiKCookiE reacted to maxtch in Samsung UD590 4K No Vesa Mount? No Problem!
This, my friend, is hard core mechanical engineering. I was thinking "ok another 3D printed thing" when reading the title and then I am greeted with a solid chunk of aluminium bonked right into my forehead.
-
HectiKCookiE got a reaction from SuperJeRoT in Samsung UD590 4K No Vesa Mount? No Problem!
Yeah the cables look pretty bad so tomorrow im gonna put them down inside the wall.
-
HectiKCookiE got a reaction from ADZ_123_!"£ in Samsung UD590 4K No Vesa Mount? No Problem!
So my room/boy cave is looking pretty well crap, all messy and beat up so im gonna do some stuff to make it look pretty nice like new bed, desk, speakers, paint wall, etc. so i picked something easy and cheap to start with, hey why not wall mount my Samsung 28" 4K display? oh that's right its not vesa mount compatible (or any mount for that matter) so i took apart the stand to see how i could mount it and found... not much just a crappy little tongue with a square hole in it. so i thought about it for a while and worked out the easiest way to do it, a block of alloy and a piece of flat bar stainless. Blah Blah Blah Bla, i doubt any one reads this anyway so ill just post some pics. plus im getting bored so no more typing! P.S I know they cables look bad but im getting some stuff so i can put them in the wall tomorrow!
-
HectiKCookiE got a reaction from TomvanWijnen in Samsung UD590 4K No Vesa Mount? No Problem!
So my room/boy cave is looking pretty well crap, all messy and beat up so im gonna do some stuff to make it look pretty nice like new bed, desk, speakers, paint wall, etc. so i picked something easy and cheap to start with, hey why not wall mount my Samsung 28" 4K display? oh that's right its not vesa mount compatible (or any mount for that matter) so i took apart the stand to see how i could mount it and found... not much just a crappy little tongue with a square hole in it. so i thought about it for a while and worked out the easiest way to do it, a block of alloy and a piece of flat bar stainless. Blah Blah Blah Bla, i doubt any one reads this anyway so ill just post some pics. plus im getting bored so no more typing! P.S I know they cables look bad but im getting some stuff so i can put them in the wall tomorrow!