Theo
-
Posts
3,429 -
Joined
-
Last visited
Recent Profile Visitors
4,689 profile views
Theo's Achievements
-
Any premixed liquids that you recommend? Already spent quite a lot of money on this so no real reason on saving 30e more
-
Which clear tubing would you recommend? Also is alcohol safe for cleaning nickel plating? ( i know vinegar isnt but i dno for alcohol) Damn you legend, thats what I had and i just realised that the most affected ones were right after the kill coil, i was going to get a biocide anyway so this works out well
-
If i remember correctly it the Pro LRT that have that problem, Advanced should be fine from what i had read. However this is not coming off even with intense scrubbing
-
Primoflex Advanced LRT, if its that, shouldnt it come off with cleaning?
-
Nah its not that, all the metals are fine and all the blocks were looking as good as new, its those fittings that only have it
-
the fluid was distilled water though
-
Hello all, I did a complete tear down of my watercooling loop since it was running for a year and I noticed these tiny little bubbles on the compression fittings. The system overall had no growth or issues with different metals being mixed. 3/10 fittings did not have it but i dont remember where they where. Any idea of what these are? I tried soapy water and cotton swabs and they dont come off. I could probably use them again and have 0 issues but want to know if anyone else has seen these before? Thank you
-
Chocolate is nice but i prefer vanilla or cream. Ask her for that fam
-
i got 2 black ice sr2's and i run them with rpm around 500-600 and the temps are pretty good. -
you put 8aa right? The game doesnt like max AA, turn it down and itll work.
-
do u have AA max or res scaling or something? my 4770k at 4.2 with a 980ti gets the same FPS in 1440p in max settings with scaling to 100% and no AA in dx11
-
I have increased them and it made no difference to cpu temps, it makes a difference to gpu but no cpu If i delid ill get a bigger difference cause haswell. Room is always 20c and as for water temp, i dont have a sensor yet, but if the gpu is around 26c, the water temp should be lower than that.
-
Yeah its an EVO block, i got a black top so i cant see inside and i use the correct IN and OUT port. Ill see how the temps go when playing cpu intensive games or programs but delidding will probably happen once the warranty runs out
-
nothing obstructing the way here. I might just delid
-
@W-L @0ld_Chicken I just remounted the block, used different tim and the temps are the same so could it just be the bad tim in the IHS?
