Cleaning Side Panel Window

[Vivilacqua1]

So, my PC is VERY dusty. like FILTHY. somehow it gets super dusty real quick and I would like to know the optimal way to clean the dust off. Some of you may say to just use a microfiber cloth, but i am afraid that it will jut have the dust scraping into the acrylic and leave millions of micro-scratches. If anyone knows a way, that would be great. Thanks!

[connorpiper]

The H440s acrylic is pretty good. Some windex and a paper towel or cloth will do the trick.

[CCap]

 

FOUND IT

[Almercenary]

I just use water mixed with either vinegar or disinfectant. Windex will do the job to i would think. Then use paper towel or tissues.

[Vivilacqua1]

The H440s acrylic is pretty good. Some windex and a paper towel or cloth will do the trick.

It got scratched so easily, its the worst case acrylic that I have ever seen. (as its the only case acrylic that I have ever seen...)

[Vivilacqua1]

 

FOUND IT

I was wondering more for the window itself. thanks though! (i will use an air compressor for the inside)

 

ps: that has to be my favorite ltt video ever

[CCap]

I was wondering more for the window itself. thanks though! (i will use an air compressor for the inside)

 

ps: that has to be my favorite ltt video ever

I'm going to be completely honest with you, somehow I completely read over the title and thought you were asking how to clean the dust out of your pc.

 

How did I even manage to do that ,-,

[W-L]

It got scratched so easily, its the worst case acrylic that I have ever seen. (as its the only case acrylic that I have ever seen...)

 

Acrylic tends to get scratched really easy unless you have some of the harder optiplex material but even that will scratch over time unfortunately, just the nature of the material. If it really bothers you or it gets too much it can be polish back out into a really nice finish using some acrylic/plastic polish or using a cutting and polish method like painting cars. 

 

http://www.amazon.com/Novus-Plastic-Polish-Scratch-Remover/dp/B000J41VDM

[Vivilacqua1]

Acrylic tends to get scratched really easy unless you have some of the harder optiplex material but even that will scratch over time unfortunately, just the nature of the material. If it really bothers you or it gets too much it can be polish back out into a really nice finish using some acrylic/plastic polish or using a cutting and polish method like painting cars. 

 

http://www.amazon.com/Novus-Plastic-Polish-Scratch-Remover/dp/B000J41VDM

eventually I was going to buy some Novus, but for the time being, I was going to be extremely careful

[Norman_the_Owl]

The H440s acrylic is pretty good. Some windex and a paper towel or cloth will do the trick.

NO

 

If  you don't use a microfiber cloth of nice quality on the H440 window, it will scratch