Jump to content

No Post Everything Works Fine

Go to solution Solved by Pc Casual YF,

HDMI cable broken

    Hello there, I just built my first computer and it had no signal on the screen even though everything was working, so I used the pinned post about no signal and after trying most things (some things I didn't have another PC or another GPU, CPU, or PC to work with). So any help?

 

 

 

 

                     

Details:

     I built a PC with all new components other than a refurbished motherboard and the I tried going into bios before I boot it with ubuntu and my GPU ( which was in a x16 pcie slot, where it is supposed to be) had not signal on the monitor but the fans did work. After that, I put it into the

x8 slot and then it worked and I booted ubuntu and everything worked other than l4d2 had like 1 fps on a 1060 6gb. After a few days I tried to boot it and now only the LEDs worked then I  removed and put back the power cables then the fans CPU and everything worked and NOW, I cannot boot the computer even though everything works.

 

Specs:

MB: Asus X470 Prime Pro

CPU: Ryzen 5 2600

GPU: EVGA Superclocked 1060 6GB

PSU: EVGA 550w G3

RAM: 1x8 GB Ballistix Sport 

Edited by Pc Casual YF
I mad it look better
Link to comment
https://linustechtips.com/topic/987336-no-post-everything-works-fine/
Share on other sites

Link to post
Share on other sites

24 minutes ago, Pc Casual YF said:

    Hello there, I just built my first computer and it had no signal on the screen even though everything was working, so I used the pinned post about no signal and after trying most things (some things I didn't have another PC or another GPU, CPU, or PC to work with). So any help?

 

 

 

 

                     

Details:

     I built a PC with all new components other than a refurbished motherboard and the I tried going into bios before I boot it with ubuntu and my GPU ( which was in a x16 pcie slot, where it is supposed to be) had not signal on the monitor but the fans did work. After that, I put it into the

x8 slot and then it worked and I booted ubuntu and everything worked other than l4d2 had like 1 fps on a 1060 6gb. After a few days I tried to boot it and now only the LEDs worked then I  removed and put back the power cables then the fans CPU and everything worked and NOW, I cannot boot the computer even though everything works.

 

Specs:

MB: Asus X470 Prime Pro

CPU: Ryzen 5 2600

GPU: EVGA Superclocked 1060 6GB

PSU: EVGA 550w G3

RAM: 1x8 GB Ballistix Sport 

Bad refurb? Who's the vendor? 

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 11 and Fedora Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

PSU tier list

How many watts do I need?

PSU misconceptions, protections explainedgroup reg is bad

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×