Jump to content

Help with new ram

iPickle94
By iPickle94
in CPUs, Motherboards, and Memory
 Share
Posted

I just purchased new ram, g.skill ripsaw ddr4 2x8gb 3200, and i installed it and now my computer will not boot up anymore. I tried reinstalling the ram I had in it before and it's still doing it. It never did this before i tried to install the new ram. Below is what I have for a system and also a video of what my "post codes" are.

 

I should add that my computer is a prebuild one from digital storm and that the ram I had in it is something from digital storm but they are ddr4 2666 2x4gb

 

https://pcpartpicker.com/list/

 

http://imgur.com/gallery/C9W1w5o

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, iPickle94 said:

I just purchased new ram, g.skill ripsaw ddr4 2x8gb 3200, and i installed it and now my computer will not boot up anymore. I tried reinstalling the ram I had in it before and it's still doing it. It never did this before i tried to install the new ram. Below is what I have for a system and also a video of what my "post codes" are.

 

I should add that my computer is a prebuild one from digital storm and that the ram I had in it is something from digital storm but they are ddr4 2666 2x4gb

 

https://pcpartpicker.com/list/

 

http://imgur.com/gallery/C9W1w5o

Why don't you start by resetting the CMOS?

You can usually do this by taking out the button cell battery on the motherboard while it's unplugged, but some motherboards have a button/jumper to do this quickly.

REMILIA Mk.IIIE CPU: Ryzen 9 3900X, Cooler: Arctic Freezer II 240 (Noctua NT-H2), RAM: 4x 8Gb sticks of Patriot Viper Steel Series 3600 CL17, Mobo: AsRock X570 Taichi, GPU: Inno3D RTX 3080 iChill x4 10G, Storage: 1TB Intel 670p NVME SSD boot drive, a few 1TB and 512gb SATA/NVME SSDs for game storage, 6 hard drives 1-4 TB, PSU: Corsair RM750 MY2019, Case: Cooler Master Mastercase 5 MC500 (with add-ons, Noctua NF-A14 and Arctic P14 fans), PCIE Cards: Cheap Chinese Marvell 88SE9215 4 port SATA card, Sonnet Allegro USB3.2 Card Monitors: ViewSonic Elite XG270QC (165hz, 1ms MPRT, 1440p, VA, Freesync PP, pneumatic stand), Hp Z27n (IPS, 60hz, 1440p, 8Ms), iiyama G2530HSU-B (75Hz, Freesync, one in landscape, one in Portrait, all on pneumatic monitor stands).

 

Mic: iSK UPM-1 USB XLR interface with Neewer NW700, Audio: Sabaj A3 160W DAC/AMP + Wharfdale Diamond 220 + Mission MS6 Sub, ifi Zen DAC v2 + ifi Zen CAN, Littledot Mk.II (w/ Soviet Power tubes and British Mulard M8100s/Soviet Voshkod 6JP-EV/ American General Electric JAN 5654W dependent on mood), Sendy Aiva (Primary), Beyer Dynamic DT990 250ohm Black Special Edition, Audeze EL-8 Open Back, Sennheiser HD598SE (modified to be a headset, snapped headband held together with gorilla tape), Mouse: SteelSeries Rival 600, Keyboard: Glorious GMMK ISO with Mengmoda MMD Tactile (main) and Kailh Box Navy (Function keys), Tribosys 3203 brush lubed, Taihao Green forest caps.

 

KOAKUMA Mk.IB (24/7 Folding Slave PC made of spare parts): CPU: Core i7 4770, Cooler: Some small antex cooler with 80mm fan, RAM: 2x 4Gb Sticks of 2400Mhz DDR3, Mobo: Asus H81i-Plus, GPU: R9 390 Nitro+ (barely fits in case), Storage: 256gb Korean no-name SATA SSD, PSU: Corsair CX550 (Gray label), Case: Antec ISK600 ITX case. [Given away to friend]

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Do I leave it out and turn it back on or put it back in then turn it on?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, iPickle94 said:

Do I leave it out and turn it back on or put it back in then turn it on?

You usually remove the battery for 10 seconds or so, then you'd put it back in and turn the PSU back on.

REMILIA Mk.IIIE CPU: Ryzen 9 3900X, Cooler: Arctic Freezer II 240 (Noctua NT-H2), RAM: 4x 8Gb sticks of Patriot Viper Steel Series 3600 CL17, Mobo: AsRock X570 Taichi, GPU: Inno3D RTX 3080 iChill x4 10G, Storage: 1TB Intel 670p NVME SSD boot drive, a few 1TB and 512gb SATA/NVME SSDs for game storage, 6 hard drives 1-4 TB, PSU: Corsair RM750 MY2019, Case: Cooler Master Mastercase 5 MC500 (with add-ons, Noctua NF-A14 and Arctic P14 fans), PCIE Cards: Cheap Chinese Marvell 88SE9215 4 port SATA card, Sonnet Allegro USB3.2 Card Monitors: ViewSonic Elite XG270QC (165hz, 1ms MPRT, 1440p, VA, Freesync PP, pneumatic stand), Hp Z27n (IPS, 60hz, 1440p, 8Ms), iiyama G2530HSU-B (75Hz, Freesync, one in landscape, one in Portrait, all on pneumatic monitor stands).

 

Mic: iSK UPM-1 USB XLR interface with Neewer NW700, Audio: Sabaj A3 160W DAC/AMP + Wharfdale Diamond 220 + Mission MS6 Sub, ifi Zen DAC v2 + ifi Zen CAN, Littledot Mk.II (w/ Soviet Power tubes and British Mulard M8100s/Soviet Voshkod 6JP-EV/ American General Electric JAN 5654W dependent on mood), Sendy Aiva (Primary), Beyer Dynamic DT990 250ohm Black Special Edition, Audeze EL-8 Open Back, Sennheiser HD598SE (modified to be a headset, snapped headband held together with gorilla tape), Mouse: SteelSeries Rival 600, Keyboard: Glorious GMMK ISO with Mengmoda MMD Tactile (main) and Kailh Box Navy (Function keys), Tribosys 3203 brush lubed, Taihao Green forest caps.

 

KOAKUMA Mk.IB (24/7 Folding Slave PC made of spare parts): CPU: Core i7 4770, Cooler: Some small antex cooler with 80mm fan, RAM: 2x 4Gb Sticks of 2400Mhz DDR3, Mobo: Asus H81i-Plus, GPU: R9 390 Nitro+ (barely fits in case), Storage: 256gb Korean no-name SATA SSD, PSU: Corsair CX550 (Gray label), Case: Antec ISK600 ITX case. [Given away to friend]

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Okay so I'm assuming that worked, I got a screen up and it said to either press f1 to run setup or f2 to run last setup. I clicked f1 and it brought me to my bios. What can/do I do from here? Or is that it? 

15400733499544914572718948145098.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, iPickle94 said:

Okay so I'm assuming that worked, I got a screen up and it said to either press f1 to run setup or f2 to run last setup. I clicked f1 and it brought me to my bios. What can/do I do from here? Or is that it? 

15400733499544914572718948145098.jpg

I suggest you try turning XMP on, see if the PC will work at whatever the RAM has as a XMP setting.

Other than that, just save and quit.

REMILIA Mk.IIIE CPU: Ryzen 9 3900X, Cooler: Arctic Freezer II 240 (Noctua NT-H2), RAM: 4x 8Gb sticks of Patriot Viper Steel Series 3600 CL17, Mobo: AsRock X570 Taichi, GPU: Inno3D RTX 3080 iChill x4 10G, Storage: 1TB Intel 670p NVME SSD boot drive, a few 1TB and 512gb SATA/NVME SSDs for game storage, 6 hard drives 1-4 TB, PSU: Corsair RM750 MY2019, Case: Cooler Master Mastercase 5 MC500 (with add-ons, Noctua NF-A14 and Arctic P14 fans), PCIE Cards: Cheap Chinese Marvell 88SE9215 4 port SATA card, Sonnet Allegro USB3.2 Card Monitors: ViewSonic Elite XG270QC (165hz, 1ms MPRT, 1440p, VA, Freesync PP, pneumatic stand), Hp Z27n (IPS, 60hz, 1440p, 8Ms), iiyama G2530HSU-B (75Hz, Freesync, one in landscape, one in Portrait, all on pneumatic monitor stands).

 

Mic: iSK UPM-1 USB XLR interface with Neewer NW700, Audio: Sabaj A3 160W DAC/AMP + Wharfdale Diamond 220 + Mission MS6 Sub, ifi Zen DAC v2 + ifi Zen CAN, Littledot Mk.II (w/ Soviet Power tubes and British Mulard M8100s/Soviet Voshkod 6JP-EV/ American General Electric JAN 5654W dependent on mood), Sendy Aiva (Primary), Beyer Dynamic DT990 250ohm Black Special Edition, Audeze EL-8 Open Back, Sennheiser HD598SE (modified to be a headset, snapped headband held together with gorilla tape), Mouse: SteelSeries Rival 600, Keyboard: Glorious GMMK ISO with Mengmoda MMD Tactile (main) and Kailh Box Navy (Function keys), Tribosys 3203 brush lubed, Taihao Green forest caps.

 

KOAKUMA Mk.IB (24/7 Folding Slave PC made of spare parts): CPU: Core i7 4770, Cooler: Some small antex cooler with 80mm fan, RAM: 2x 4Gb Sticks of 2400Mhz DDR3, Mobo: Asus H81i-Plus, GPU: R9 390 Nitro+ (barely fits in case), Storage: 256gb Korean no-name SATA SSD, PSU: Corsair CX550 (Gray label), Case: Antec ISK600 ITX case. [Given away to friend]

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

It's working! Thank you all so much for the help. It is gratefully appreciated! 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, iPickle94 said:

It's working! Thank you all so much for the help. It is gratefully appreciated! 

It's my pleasure

REMILIA Mk.IIIE CPU: Ryzen 9 3900X, Cooler: Arctic Freezer II 240 (Noctua NT-H2), RAM: 4x 8Gb sticks of Patriot Viper Steel Series 3600 CL17, Mobo: AsRock X570 Taichi, GPU: Inno3D RTX 3080 iChill x4 10G, Storage: 1TB Intel 670p NVME SSD boot drive, a few 1TB and 512gb SATA/NVME SSDs for game storage, 6 hard drives 1-4 TB, PSU: Corsair RM750 MY2019, Case: Cooler Master Mastercase 5 MC500 (with add-ons, Noctua NF-A14 and Arctic P14 fans), PCIE Cards: Cheap Chinese Marvell 88SE9215 4 port SATA card, Sonnet Allegro USB3.2 Card Monitors: ViewSonic Elite XG270QC (165hz, 1ms MPRT, 1440p, VA, Freesync PP, pneumatic stand), Hp Z27n (IPS, 60hz, 1440p, 8Ms), iiyama G2530HSU-B (75Hz, Freesync, one in landscape, one in Portrait, all on pneumatic monitor stands).

 

Mic: iSK UPM-1 USB XLR interface with Neewer NW700, Audio: Sabaj A3 160W DAC/AMP + Wharfdale Diamond 220 + Mission MS6 Sub, ifi Zen DAC v2 + ifi Zen CAN, Littledot Mk.II (w/ Soviet Power tubes and British Mulard M8100s/Soviet Voshkod 6JP-EV/ American General Electric JAN 5654W dependent on mood), Sendy Aiva (Primary), Beyer Dynamic DT990 250ohm Black Special Edition, Audeze EL-8 Open Back, Sennheiser HD598SE (modified to be a headset, snapped headband held together with gorilla tape), Mouse: SteelSeries Rival 600, Keyboard: Glorious GMMK ISO with Mengmoda MMD Tactile (main) and Kailh Box Navy (Function keys), Tribosys 3203 brush lubed, Taihao Green forest caps.

 

KOAKUMA Mk.IB (24/7 Folding Slave PC made of spare parts): CPU: Core i7 4770, Cooler: Some small antex cooler with 80mm fan, RAM: 2x 4Gb Sticks of 2400Mhz DDR3, Mobo: Asus H81i-Plus, GPU: R9 390 Nitro+ (barely fits in case), Storage: 256gb Korean no-name SATA SSD, PSU: Corsair CX550 (Gray label), Case: Antec ISK600 ITX case. [Given away to friend]

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×