LEDs NOT WORKING (Why? Help?)

[Spix737]

Heyya Guys!

 

So I bought a new pair of Scythe RGB Illuminacion Led strips (Magnetic LEDs) to make my build look sweeter.

I uhnboxed them, plugged all the cables in correctly, turned on the PC and they Worked! Hooray!

However, they keep flashing random, consistent colours, so I decided to install a software to control them.

I installed both ASROCK and ASUS' software for LED lights, as those were the two which were listed compatible on the box.

Unfortunately, neither of them work! The ASROCK is a bare-bones program, which does absolutely nothing, and the first version of ASUS software (had an 0.5 or something) didn't even startup, and the second version I installed (an 0.6 I think? the latest one anyway) did turn on, but couldn't find the lights.

 

Anyone knows what to do? Would be a huge help. Thanks!

 

P.s. My Mobo comes with an RGB header port and an AMD_led_1 port, I tried either one AND both, but no change...

Motherboard (ASROCK B350 Pro Atx)

[-rascal-]

13 minutes ago, Spix737 said:

Heyya Guys!

 

So I bought a new pair of Scythe RGB Illuminacion Led strips (Magnetic LEDs) to make my build look sweeter.

I uhnboxed them, plugged all the cables in correctly, turned on the PC and they Worked! Hooray!

However, they keep flashing random, consistent colours, so I decided to install a software to control them.

I installed both ASROCK and ASUS' software for LED lights, as those were the two which were listed compatible on the box.

Unfortunately, neither of them work! The ASROCK is a bare-bones program, which does absolutely nothing, and the first version of ASUS software (had an 0.5 or something) didn't even startup, and the second version I installed (an 0.6 I think? the latest one anyway) did turn on, but couldn't find the lights.

 

Anyone knows what to do? Would be a huge help. Thanks!

 

P.s. My Mobo comes with an RGB header port and an AMD_led_1 port, I tried either one AND both, but no change...

Motherboard (ASROCK B350 Pro Atx)

 

You have an ASRock board, so you want to be using the ASRock software.

I see the latest version if 1.0.3.7. Is this what you downloaded?

 

The ASUS software only works with ASUS motherboards...

 

You should be able to control the RGBs within the UEFI software as well -- actuall,y this is vary between motherboards and manufacturers...

[narrdarr]

thats what i was going to say.

try setting the color mode in the bios

 

[Spix737]

THANK YOU GUYS!

 

I went to the Bios and from there, I could edit them.

I can always rely on the LTT community!!!