Jump to content

Aloha Everyone!
Need some advice for my problem.
First of all this is my build: BluePhoenix Rig with a full EKWB water cooling system (pump 45W).
My GPU randomly stops working, black screen, and if I hibernate my machine and instantly start it again then the Windows 10 says that driver stopped working.
I just used DDU and reinstalled with a clean install the latest Nvidea driver, but the problem is still on.
My napkin math says that my total power consumption is about 485 Watts with the 8 fans, pump, 1 NVME SSD, 2 Sata based SSD, 3 HDD, 8700K, and 980 and the PSU is a Bitfenix Whisper M 550 W 80+ Gold.
No overclock.
I do not know what should I do.
Please help.
Thnx Guys

Link to comment
https://linustechtips.com/topic/975501-gpu-randomly-stops-working/
Share on other sites

Link to post
Share on other sites

Any correlation for when it goes out? Stressing GPU, gaming, etc? Have you checked disk health?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 11 and Fedora Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

PSU tier list

How many watts do I need?

PSU misconceptions, protections explainedgroup reg is bad

Link to post
Share on other sites

Checked everything's health, Every SSD is 100 %, One HDD is on 99 % others are 100 %.
When Does it appear? Thats funny... randomly everytime. When I Browser the Internet with 0 stress sometimes after 4 hours sometimes after 5 minutes. Same with Games or with work.

Link to post
Share on other sites

7 minutes ago, Bluefoenix said:

Checked everything's health, Every SSD is 100 %, One HDD is on 99 % others are 100 %.
When Does it appear? Thats funny... randomly everytime. When I Browser the Internet with 0 stress sometimes after 4 hours sometimes after 5 minutes. Same with Games or with work.

Have you tried older drivers ?

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 11 and Fedora Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

PSU tier list

How many watts do I need?

PSU misconceptions, protections explainedgroup reg is bad

Link to post
Share on other sites

Been testing it for 12 hours and nothing changed...
Currently on 398.82 Driver, every Drive is in good condition (above 99%), Ram has some overclock to run on it's factory speed (Corsair Dominator Platinum 4*8 Gb, 4Ghz, on an Asus Gaming Z370-E Board clocked to 3,6 Ghz, High then that and system looses it). Someone suggestion?

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×