HTPC Help needed

[harmeet_randhawa5]

I built a HTPC a while ago in Node 202 and the specs are:

i5 6600 8GB RAM

Asus B150I PRO GAMING/WIFI/AURA latest bios 2606

EVGA GTX1070 FTW

500W SF-L Silverstone power supply

I moved the PC to another room so I attached a USB 3.0 hub to it for peripherals. After a few minutes I started noticing lag with keyboard and the mouse so I unplugged the keyboard from the hub and just used mouse and it worked fine. The hub was powered so I thought maybe its the hub that is faulty. I bought a new hub and the same problem. Checked with all the ports and the problem remains the same. I then found that any of the hubs cant get my Sandisk Extreme 64GB to detect but it shows the status light. Till then I had bought 6 USB hubs and all have the same problem. I have also tried hubs with 12V power but everything is the same. Is my motherboard faulty or something else? I am unable to figure out the problem. Deleted and reinstalled USB driver and all devices also didnt resolve the problem. Is it Windows 10 issue maybe? Any help would be appreciated.

[itisme911]

Well im not sure whats going on here but you plugged directly into the motherboard right? and with  the power issue, a 1070 and 6th gen I5 draw some power, could your power supply be struggling?

[TheFlyingTraut]

What usb port are you plugged into? Are you plugging a hub into an extender? 

[harmeet_randhawa5]

The back of the motherboard has two USB 3.0 ports. I plug a external drive in one and the hub in the other port. Then keyboard and mouse gets plugged into the hub. I had my power supply replaced recently.