DO qsfp wall plates exist.

[dijiboy123]

I am looking for a qsfp fall plate to use with one of the infiniband cards from this vid.  I need something that can do 10 gigabit and preferable more. Thanks

 

[Falconevo]

10GBase-T can be used with standard RJ45 faceplate termination aslong as you are using cat6a+ for the cabling, that is however limited to 10G at a 100m distance.   Requires a 10GBase-T capable switch though, as far as I know there isn't such a thing as a SFP+ or QSFP faceplate nor would the enterprise industry ever have a need for one.

[Lurick]

If you want to do fiber you have two options with a standard wallplate, either an LC fiber coupler or an MTP/MPO coupler like this:

https://www.pimfg.com/product-detail/SPM-MPO-WH

 

Then you can do either a QSFP BiDi optic and standard OM4 LC-LC cable

or

QSFP MM or SM optic with MTP/MPO cables.

[Lurick]

39 minutes ago, Falconevo said:

10GBase-T can be used with standard RJ45 faceplate termination aslong as you are using cat6a+ for the cabling, that is however limited to 10G at a 100m distance.   Requires a 10GBase-T capable switch though, as far as I know there isn't such a thing as a SFP+ or QSFP faceplate nor would the enterprise industry ever have a need for one.

Just a standard LC-LC fiber coupler installed in a wallplate is what I use for 10G fiber

[beersykins]

Pretty much as above, QSFP is the transceiver interface, not the physical interface of the cable.

 

Standard LC plates would still be used most commonly, or MTP/MPO, although I haven't seen those broken out outside of a local rack.

[Falconevo]

1 hour ago, Lurick said:

Just a standard LC-LC fiber coupler installed in a wallplate is what I use for 10G fiber

ultimate bodge  if it works it works tho!