Power supply plugin

[Blindeagle]

Hey guys does it matter were i plug in my cpu connector and graphic card connector on the "be quiet! Straight Power 11 CM 750W" As the lables on the psu just says PCIE1 , PICE2 etc So i know on the cpu im using a 8 pin one ( it says on the cable ( cpu1-p4 and cpu2-p8)) and then for the grahic card one im using the (6 pin to 16 pin connector for the graphic card ) and thats labled vga1 

 

Any help would be great

 

My parts: https://pcpartpicker.com/list/xBwBzY

 

Ive added a pic to show the psu 

[TheKDub]

Plug it into the 8-pin connector directly next to the 24-pin. (The one closest to the warranty void if removed sticker)

[Blindeagle]

1 minute ago, TheKDub said:

Plug it into the 8-pin connector directly next to the 24-pin. (The one closest to the warranty void if removed sticker)

I plugged the 24 pin one into there, do you mean the one above it? 

[Blindeagle]

Am i right in saying the Red bits are the 24 pin for motherboard?

The blue one is for the CPU

The green one is for gtx1080ti which is a 12 pin one and gives me 2 x 8 pins?

 

Sorry new to this  

 

[TheKDub]

6 minutes ago, Blindeagle said:

I plugged the 24 pin one into there, do you mean the one above it? 

Hmm... Didn't realize the one I saw floating around the picture was just for the 24-pin.

 

I'd check the manual, it should know where to put it.

[Blindeagle]

Just now, TheKDub said:

Hmm... Didn't realize the one I saw floating around the picture was just for the 24-pin.

 

I'd check the manual, it should know where to put it.

All good i figured it out  Pic is above to see