My PC won't boot

[Snakkey]

So I just added a new ssd to my pc and cloned it using macrium. I then went into my bios but didn't change anything and turned off my pc. Now it won't boot, but all the lights work and my msi motherboard ezdebug lights confirm that it is a boot drive issue.

[Speed Weed]

Check your cable? 

[Snakkey]

Just now, DaPhuc said:

Check your cable? 

Swapped the cables a few times and it is plugged in all the way.

[Speed Weed]

I believe the partition is not active and the bootloader is corrupted on your clone drive. 

[Snakkey]

Just now, DaPhuc said:

I believe the partition is not active and the bootloader is corrupted on your clone drive. 

So what should I do?

[Speed Weed]

3 minutes ago, Snakkey said:

So what should I do?

Do you have another computer to make a bootable Windows recovery environment, so you can lauch diskpart command to check if the partition is active on your new clone drive? It could be the cloning bombed the partition on your drive. 

[Snakkey]

Just now, DaPhuc said:

Do you have another computer to make a bootable Windows recovery environment, so you can lauch diskpart command to check if the partition is active on your new clone drive? It could be the cloning bombed the partition on your drive. 

I have a 16gb usb and a working pc with windows. Could you explain how to make a windows recovery thing?

[Speed Weed]

3 minutes ago, Snakkey said:

I have a 16gb usb and a working pc with windows. Could you explain how to make a windows recovery thing?

https://www.pcworld.com/article/3140449/windows/everything-you-need-to-know-about-windows-10-recovery-drives.html

[TiresomeToe933]

... Try removing the SSD, then attempt booting again. It could he a corrupted MBR or GPT sector.

[Snakkey]

3 minutes ago, TiresomeToe933 said:

... Try removing the SSD, then attempt booting again. It could he a corrupted MBR or GPT sector.

Didn't work

[TiresomeToe933]

...... Ok Ok, do you know what type of boot drive error it is? If Windows Boot Files are corrupted, we could use a installation disk to boot into Windows RE, from there we can attempt to repeat windows. If that does not work, we could use Windows PE as we access to CMD (although so does RE...) Have you used could use fsck, /scannow , chkdsk C: /R , sfc /scannow , etc.?

 

However, if this is a MBR or GPT boot sector corruption, we have to reset the drive. In this case, use a Linux Live USB to transfer the data to somewhere else, or use a SATA to USB cable to move it to another PC.

[Snakkey]

27 minutes ago, DaPhuc said:

https://www.pcworld.com/article/3140449/windows/everything-you-need-to-know-about-windows-10-recovery-drives.html

I made a recovery drive and I plugged it in but it wont even boot into the recovery screen.

[Speed Weed]

4 minutes ago, Snakkey said:

I made a recovery drive and I plugged it in but it wont even boot into the recovery screen.

Did you try to boot from USB? 

 

Alternative is a Windows installation USB, so we can at least access CMD. 

[Snakkey]

Just now, DaPhuc said:

Did you try to boot from USB? 

 

Alternative is a Windows installation USB, so we can at least access CMD. 

How do I try to boot from usb?

[Speed Weed]

Just now, Snakkey said:

How do I try to boot from usb?

Boot order. 

[Snakkey]

Just now, DaPhuc said:

Boot order. 

But my monitor is still black. What do I do?

[Speed Weed]

Just now, Snakkey said:

But my monitor is still black. What do I do?

Did you plug your monitor cable to your computer and is it turn on? 

[Snakkey]

Just now, DaPhuc said:

Did you plug your monitor cable to your computer and is it turn on? 

Yes and Yes.

[Speed Weed]

1 minute ago, Snakkey said:

Yes and Yes.

Do you see your motherboard logo or any logo when you try to boot it up? 

[Snakkey]

Just now, DaPhuc said:

Do you see your motherboard logo or any logo when you try to boot it up? 

nope the monitor stays black.

[Speed Weed]

25 minutes ago, Snakkey said:

nope the monitor stays black.

Got any monitor to try it out? Your problem is something else. 

[TiresomeToe933]

Ok Ok Ok, I think this is a BIOS error or GPU BIOS error, because we have a black display... Try restarting BIOS. 

 

Or, your Monitor or HDMI/DP/VGA port is broken... I can't help you with that...

[Snakkey]

19 hours ago, TiresomeToe933 said:

Ok Ok Ok, I think this is a BIOS error or GPU BIOS error, because we have a black display... Try restarting BIOS. 

 

Or, your Monitor or HDMI/DP/VGA port is broken... I can't help you with that...

How do I restart the bios.

[Snakkey]

20 hours ago, DaPhuc said:

Got any monitor to try it out? Your problem is something else. 

I tried with a second monitor that booted up with the bc, but then after the monitors loading screen it went black. No bios notifications or anything.