Suggestions for mounting hdd/ssd

[T_Swizzle]

I recently rebuilt my computer this year and have been wanting to assemble the one I had been running since 2012. unfortunately I've run into a problem, my first case was an Apevia X-Jupiterg-bk and I have been unable to find any type of replacement sleds for the hdd or ssd. I don't want to modify the case too heavily, I know it isn't worth anything but I want to keep it just as it is, and for the time being I only have a hdd to use for the os. I was wondering if anyone had any ideas about how i can install a hdd that wouldn't involve numerous zip-ties and a healthy dose of double sided tape. Thanks for reading and I welcome any suggestions 

[glitchmaster0001]

for my pc i have double side sticky tape holding my SSD down to the floor of the case. It works fine and I never ran into any problems doing that

[T_Swizzle]

I'm on a very tight budget right now and I'm limited to an old hard drive I found in my closet at the moment, I just know double sided tape would be a bad idea with my old drive 

[Dark Manor]

If you have a 5 1/4 inch bay that has holes on the bottom or side see if you can mount it there. I have a HDD mounted in a hexagon vent for a front fan in my little brother's(7yrs)  computer. See if any holes anywhere free on the case line up and try to cover the pcb with some type of insulation because this is slightly risky.

[T_Swizzle]

A friend of mine has a removable hhd cage from a phantom case with two sleds that I think i can mount in place of the 5.25 inch bay securely 

[Dark Manor]

6 minutes ago, T_Swizzle said:

A friend of mine has a removable hhd cage from a phantom case with two sleds that I think i can mount in place of the 5.25 inch bay securely 

Even better. That is way less jank.

[T_Swizzle]

I'm debating on putting it in place of the bottom of 5.25 inch bays or removing the mount for the front fan and part of the original hdd cage and mount it there. I'll have to sleep on it