Jump to content

Bios conf help needed

Go to solution Solved by bebejapes,
1 minute ago, eengamerjens said:

Windows is installed on the 1TB SSD

How can I get the SSD to show up in the bios?

-Advance Settings usuall its there see image below.

-Boot option is another location and then check availability.

 

And my 3.5" HDD to see my data?

-you can only set this though disk management when you raid 1 or raid 0.

-when you raid the drives you  might not be able to view them without using various versions of data viewing software. Especially if you  raid 0 the drives.

 

151220184208.jpg

Hello LTT Forum

 

Can you help me with a configurating my BIOS?

I have 3 x 750GB 2.5" HDD, 2 x 500GB 3.5" HDD and a 1TB M.2 BOOT SSD

I want to have the 3 x 2.5" HDD in Raid 5.

But I have all my hdd in ahci not intel rst premium mode.

But if I set my bios to intel rst then I can't boot of it the SSD.

How can I get the SSD to show up in the bios?

And my 3.5" HDD to see my data?

 

Specs:

I7 6700k

GA-Z170-HD3 DDR3 with Bios version 21F

16GB ram

GTX 960 gigabyte windforce

3 x 750GB 2.5" HDD, 2 x 500GB 3.5" HDD and a 1TB M.2 BOOT SSD

Link to comment
https://linustechtips.com/topic/946892-bios-conf-help-needed/
Share on other sites

Link to post
Share on other sites

4 minutes ago, eengamerjens said:

Hello LTT Forum

 

Can you help me with a configurating my BIOS?

I have 3 x 750GB 2.5" HDD, 2 x 500GB 3.5" HDD and a 1TB M.2 BOOT SSD

I want to have the 3 x 2.5" HDD in Raid 5.

But I have all my hdd in ahci not intel rst premium mode.

But if I set my bios to intel rst then I can't boot of it the SSD.

How can I get the SSD to show up in the bios?

And my 3.5" HDD to see my data?

 

Specs:

I7 6700k

GA-Z170-HD3 DDR3 with Bios version 21F

16GB ram

GTX 960 gigabyte windforce

3 x 750GB 2.5" HDD, 2 x 500GB 3.5" HDD and a 1TB M.2 BOOT SSD

1.did you already raid it?

2.did you load an os into it?

Link to comment
https://linustechtips.com/topic/946892-bios-conf-help-needed/#findComment-11527033
Share on other sites

Link to post
Share on other sites

1 minute ago, eengamerjens said:

with ahci yes

but with intel rst not (don't show up in the bios)

from what i udnerstand

your booting off you m.2 ssd right

then your raiding the 3.5hdd

well you could use the disk management and disk partition mode in your os to raid them. they would still show up in bios mode.

 

 

What is your psu?

Link to comment
https://linustechtips.com/topic/946892-bios-conf-help-needed/#findComment-11527061
Share on other sites

Link to post
Share on other sites

2 minutes ago, bebejapes said:

from what i udnerstand

your booting off you m.2 ssd right

then your raiding the 3.5hdd

well you could use the disk management and disk partition mode in your os to raid them. they would still show up in bios mode.

 

 

What is your psu?

650 watt vs corsair 

Link to comment
https://linustechtips.com/topic/946892-bios-conf-help-needed/#findComment-11527071
Share on other sites

Link to post
Share on other sites

1 minute ago, eengamerjens said:

Windows is installed on the 1TB SSD

How can I get the SSD to show up in the bios?

-Advance Settings usuall its there see image below.

-Boot option is another location and then check availability.

 

And my 3.5" HDD to see my data?

-you can only set this though disk management when you raid 1 or raid 0.

-when you raid the drives you  might not be able to view them without using various versions of data viewing software. Especially if you  raid 0 the drives.

 

151220184208.jpg

Link to comment
https://linustechtips.com/topic/946892-bios-conf-help-needed/#findComment-11527187
Share on other sites

Link to post
Share on other sites

21 hours ago, bebejapes said:

How can I get the SSD to show up in the bios?

-Advance Settings usuall its there see image below.

-Boot option is another location and then check availability.

 

And my 3.5" HDD to see my data?

-you can only set this though disk management when you raid 1 or raid 0.

-when you raid the drives you  might not be able to view them without using various versions of data viewing software. Especially if you  raid 0 the drives.

 

151220184208.jpg

Thanks

Link to comment
https://linustechtips.com/topic/946892-bios-conf-help-needed/#findComment-11529999
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×