Internal Xbox One Adapter

[macintoshme]

Arm started bugging me while I was soldering on the internal connector for this, so I figured I could take a break and post these pics for anyone else thinking about it.

 

 

I soldered two of the leads on the sync button to little leads (the two leads on radio side of the button) those go to the reset button on my case. I soldered a lead on each side of the LED. I secured the wires with hot glue as strain relief as it is fiddly work. The LED could be removed from the board and it would brighten the case light.

 

I know the controller will work with Bluetooth, but this is my LAN/VR Rig/TV Box. I wanted to be able to hook up at least 2 xbone controllers simultaneously. As an added perk, I should be able to play games at night from the couch with headphones plugged into the controller and not wake anyone.