External PSU for external watercooling

[Owlman]

Not sure if this subforum is only meant for PSU's that go in PC's so please move this topic if i posted in the wrong place.

 

I'm looking to power 6 fans, a D5 pump, and a fan controller. Silent Wings 3 120mm PWM, and a NZXT Sentry 3

 

The fans and the pump need around 30 watts, probably a watt or two for the fan controller.

 

Is it as easy as using this?

https://www.watercoolinguk.co.uk/p/Phobya-external-PSU-230V-to-4Pin-Molex-70W-Including-Euro--UK-plug_58177.html

 

Please recommend other PSUs that suit my needs

[Adorable Cat]

That'd likely work, you'd need some Molex splitters and adapters if any of the stuff isn't powered with a Molex connection. Also this may be more suited to the Liquid and Exotic cooling forum just because you might get better answers there. Good luck

[Owlman]

13 minutes ago, Sayori said:

That'd likely work, you'd need some Molex splitters and adapters if any of the stuff isn't powered with a Molex connection. Also this may be more suited to the Liquid and Exotic cooling forum just because you might get better answers there. Good luck

Is there an easy way to move it or should i just post this again in Liquid and Exotic cooling?

 

[Adorable Cat]

3 hours ago, Owlman said:

Is there an easy way to move it or should i just post this again in Liquid and Exotic cooling?

 

no easy way to move posts, only someone with magical moderator powers can. If you feel like it, post it again I guess.