Looking for resistor on GPU

[ozi00]

Hey,
Bascially a power surge occured and two resistors on my gpu (Gigabyte gtx980ti G1) blew. They are labelled R172 and R174 on the board, and I would like to try resoldering them if someone can help me find replacement ones. I basically need help identifying their resistance. You can see in the attachments what a pristine board looks like (the resistors Im talking about are in the bottom right) and what mine looks like. As you can see, the area Im describing is charred pretty good and the resistors have literally burnt off.

[Callum Stringer]

23 minutes ago, ozi00 said:

Hey,
Bascially a power surge occured and two resistors on my gpu (Gigabyte gtx980ti G1) blew. They are labelled R172 and R174 on the board, and I would like to try resoldering them if someone can help me find replacement ones. I basically need help identifying their resistance. You can see in the attachments what a pristine board looks like (the resistors Im talking about are in the bottom right) and what mine looks like. As you can see, the area Im describing is charred pretty good and the resistors have literally burnt off.

If you can find a documentation of the GPU online you might be able to find a detailed drawing or diagram of the model. Here you would be able to find which sort of resistor is being used

 

[UnOrignalUsername]

just buying a new board will be esay, you can still use the pch (the die in center) i will search for a board for you, i will update you if i find something.

[ozi00]

1 hour ago, UnOrignalUsername said:

just buying a new board will be esay, you can still use the pch (the die in center) i will search for a board for you, i will update you if i find something.

Thanks, can you give any tips on what I should search for on the internet to see such products?

[UnOrignalUsername]

5 hours ago, ozi00 said:

Thanks, can you give any tips on what I should search for on the internet to see such products?

gtx 980ti board slash pcb, i didnt find anything yet/ im thing to go to the dark web

[Christophe Corazza]

26 minutes ago, UnOrignalUsername said:

gtx 980ti board slash pcb, i didnt find anything yet/ im thing to go to the dark web

 

Why would you go to the dark web for that :-D

 

7 hours ago, Callum Stringer said:

If you can find a documentation of the GPU online you might be able to find a detailed drawing or diagram of the model. Here you would be able to find which sort of resistor is being used

 

 

I highly doubt that you can simply find the schematics of the PCB of a Gigabyte GTX 980 TI G1 online. That’s not something that manufacturers like to publish online.

However, of you are really determined, you could look up patents of the card.

[UnOrignalUsername]

On 29.5.2018 at 10:10 PM, Christophe Corazza said:

 

Why would you go to the dark web for that :-D

 

 

I highly doubt that you can simply find the schematics of the PCB of a Gigabyte GTX 980 TI G1 online. That’s not something that manufacturers like to publish online.

However, of you are really determined, you could look up patents of the card.

i wont go for the dark net for this i got for the dark net for seeing children

(its a joke please dont swat me house)

[uandric]

I fixed mine. It essentially had the same problem.
You can see what was happening and how i fixed it here:

 

[RoKa]

I also have that happen to mine. Fun side project?
 

 

Spoiler

 

[RoKa]

Nvm, it has a little bit too much damage I think

 

Spoiler

 

[uandric]

What you did with the card at the end?

[DelinquentDave]

Same thing has literally just happened to my GIGABYTE G1 Gaming 980Ti

[Fableton]

Mine just stop working too, it show the screen but when you try to run something in 3D it stuck the computer and show solid colors in the monitors.
I just check those component and they look burned too!!!

 

[Fableton]

14 hours ago, Fableton said:

Mine just stop working too, it show the screen but when you try to run something in 3D it stuck the computer and show solid colors in the monitors.
I just check those component and they look burned too!!!

 

The 0 ohms resistor take 1 month to arrive from China, so I will wait