Jump to content

1080ti msi gaming x

gazdadude

it says in my motherboard manual not to fit long and heavy gpus without support will be be ok without a support?

Link to comment
Share on other sites

Link to post
Share on other sites

it can break the pcie slot if the gpu is super heavy, it depends on what gpu you want to put in there. If you screw the gpu in it might just be fine, msi gaming x isn't as heavy as some old cards, like the gtx 690 or the old radeon beasts.

Link to comment
Share on other sites

Link to post
Share on other sites

Realistically its just something they put in there so that if you break it they can say its your fault. You will most likely be fine.

Link to comment
Share on other sites

Link to post
Share on other sites

MSI's Gaming X is far from being the heaviest graphics card, I can say :D

 

Just make sure you remember to mount the I/O piece onto the case's bracket. That's enough for most dual fan cards.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

34 minutes ago, Jurrunio said:

MSI's Gaming X is far from being the heaviest graphics card, I can say :D

 

Just make sure you remember to mount the I/O piece onto the case's bracket. That's enough for most dual fan cards.

It is a pretty heavy card though, 2.5 or 3 slot, idr. 

 

1 hour ago, gazdadude said:

it says in my motherboard manual not to fit long and heavy gpus without support will be be ok without a support?

You'll be fine for awhile, but when you have money you might want to pick one up. They're not too expensive and some of them look pretty good

Fanboys are the worst thing to happen to the tech community World. Chief among them are Apple fanboys. 

Link to comment
Share on other sites

Link to post
Share on other sites

3 hours ago, gazdadude said:

it says in my motherboard manual not to fit long and heavy gpus without support will be be ok without a support?

You can do a Linus mod and take a wooden stick cut it to lengt and use it on the far end of the card and then to the bottom of the case .. not pretty but its a Linus mod ;)

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×