Jump to content

Problem with bios

NesKuiT
 Share
Posted

Yesterday i had a trouble that there was low voltage on the outlet so my pc turned off after that i had to restart the cmos memory in order to make it boot again but since that my bios is not saving the configuration and because of that also my FX 8320 runs at 1.68 ghz because of Cool n quiet and i cant disable it. How can i save the configuration? I already tried changing the cmos battery. My motherboard is a MSI 970 Gaming

1520684829565881196366.jpg

Link to comment
https://linustechtips.com/topic/904326-problem-with-bios/
Share on other sites
Link to post
Share on other sites
Posted

So, you already resetted the CMOS? Maybe go into your bios and then of settings, maybe somewhere a energy saving mode is activated

    Quote=Reply      Feel free to tag me or sth if you have questions about Liquid Metal :) ROCKETS ARE LIFE                                                                      My current build:                                    

CPU: I7 6700k@4.7Ghz 1.31sth V; Liquid Metal (Thermal Grizzly Conductonaut) | Cooler: Corsair H100iv2 | GPU: HIS R9 390 | Motherboard: Asus Z170-A | RAM: 16GB 2133Mhz HyperX FuryX | Storage: 1x 250GB Samsung 960 Evo 1x random 4TB 7200RPM HDD | Case: Lian Li Alpha  550W | PSU: Corsair RM650i | Misc.: 6x Lian Li 120mm Bora RGB Fans

 

My Build Log: 

 

Link to comment
https://linustechtips.com/topic/904326-problem-with-bios/#findComment-11124807
Share on other sites
Link to post
Share on other sites
Posted

The multiplier isn't correct in speccy, maybe try CPUz. At the first picture it says it operates at 17.5 and not 8.5 also try putting it under load and then look at CPUz what it reports

    Quote=Reply      Feel free to tag me or sth if you have questions about Liquid Metal :) ROCKETS ARE LIFE                                                                      My current build:                                    

CPU: I7 6700k@4.7Ghz 1.31sth V; Liquid Metal (Thermal Grizzly Conductonaut) | Cooler: Corsair H100iv2 | GPU: HIS R9 390 | Motherboard: Asus Z170-A | RAM: 16GB 2133Mhz HyperX FuryX | Storage: 1x 250GB Samsung 960 Evo 1x random 4TB 7200RPM HDD | Case: Lian Li Alpha  550W | PSU: Corsair RM650i | Misc.: 6x Lian Li 120mm Bora RGB Fans

 

My Build Log: 

 

Link to comment
https://linustechtips.com/topic/904326-problem-with-bios/#findComment-11124812
Share on other sites
Link to post
Share on other sites
Posted (edited)
  • Author
1 hour ago, thelordofwarr said:

The multiplier isn't correct in speccy, maybe try CPUz. At the first picture it says it operates at 17.5 and not 8.5 also try putting it under load and then look at CPUz what it reports

already tried to put the cpu in throttle with prime95 and checked the clock speed at amd overdrive and it also says 1700mhz.

Edited by NesKuiT
Fixed the previous issue
Link to comment
https://linustechtips.com/topic/904326-problem-with-bios/#findComment-11124900
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×