Stabilizing my overclock - Help needed

[Tech Wizard]

Hello my dudes! I'm running a 4930K @ 4,5GHz / 1.39V for daily usage. I want to push 4,6GHz, but can't get it stable. Bluescreens halfway in Cinebench even with 1.5V. Using an ASUS X79-Deluxe & XMP for memory, so memory is 100 % stable. After not passing a single Cinebench at 1.5V, it was time to push all settings/voltages in BIOS. Below are some pics of my settings:

If you can't read VCCSA: 1.300V

 

 

 

 

 

Are there any settings I can change further to not BSOD during a Cinebench, or do I have a bad chip in terms of overclocker. Or is it perhaphs my motherboard? I don't know at this point. All comments/knowledge appriciated!

[SeanAngelo]

20 minutes ago, Tech Wizard said:

 

do you really need 4.6ghz? 1.5v is a bit too much and 4.5ghz may be what the chip is capable of.

[BryceJonathan]

This seems pointless, the performance difference for 100mhz is basically nothing and if you have ot push your voltage that high I would 100% not recommend it.

[Tech Wizard]

Just now, SeanAngelo said:

do you really need 4.6ghz? 1.5v is a bit too much and 4.5ghz may be what the chip is capable of.

Just now, BryceJonathan said:

This seems pointless, the performance difference for 100mhz is basically nothing and if you have ot push your voltage that high I would 100% not recommend it.

I don't need 4,6 at all, it's just for pushing a new record tbh

All in good fun

[SeanAngelo]

6 hours ago, Tech Wizard said:

I don't need 4,6 at all, it's just for pushing a new record tbh

All in good fun

not worth it imho, just stick to 4.5 and be happy

[dragonhart6505]

Some SKUs have a limit, no matter how much voltage you push at it. It's called the silicon lottery and honestly at 4.5, assuming you're on air, you've pretty much beat the odds already. GG