ex360mm rad screws

[skitz9417]

hi im just wondering has anyone used the small screws that u get with the ex360mm rad use them to mount the rad inside the case and im just this becasue i will be drilling holes to mount the rad inside because the doesnt have 3x120mm fan holes

 

 

 

 

 

 

 

 

 

 

[Bluejay0]

I would discourage using that screw to mount a radiator. Use a longer screw, just to safe, but not the one in the picture, those are for fan+Rad mounts.

[skitz9417]

ok so with the longer screws i should becasuse just case screw into the rad no fans then have the fans exsathing out the bottom of the rad 

[Bluejay0]

ok so with the longer screws i should becasuse just case screw into the rad no fans then have the fans exsathing out the bottom of the rad 

 

Try to mount with the smaller screw. If it fits securely and just fine, you should be ok. Just screw it on properly.

[skitz9417]

i hope it can support the weight of the rad 

[Bluejay0]

i hope it can support the weight of the rad 

 

If the screw is well built and not some ceramic shit, it should be fine. Wiggle and see if the rad is securely in place.