My RGB...

[Zuzi]

Doesn't work.I have a 460x corsair case and the built-in SP 120 mm RGB fans don't lite up.The same goes for all my other RGB like my MSI graphics card, MSI motherboard, and Corsair AIO water cooling.

I'm hoping you could help me out.

[Zuzi]

there are 4 cables coming from my fan controller and all are connected.these are 2 pin 

 

[unknownmiscreant]

There are 3 components to SP120 RGB. Hub, box with three buttons and the fans.

 

Connect the box with 3 buttons to the hub. Connect the hub to a SATA connector. Connect the fans to the hub. Make sure to start at 1 and work up. 1,2,3... etc. Otherwise they will not work as the RGB data is passed from the fan on 1 to the fan on 2 etc etc. If you skip a connector, or don't start at 1, the fans will not receive any data.

[Zuzi]

no, my SATA power connector is not plugged in and I don't have a place to do so.i only have normal SATA but the connector for the leds doesn't fit

[unknownmiscreant]

Care to send some pics. 

 

Also, quote/tag when replying so we get a notification. You're lucky I left this tab open.

[Zuzi]

18 hours ago, unknownmiscreant said:

Care to send some pics. 

 

Also, quote/tag when replying so we get a notification. You're lucky I left this tab open.

I'm sorry about that and I'm also sorry for not replying for 18 hours (i live in Austria).I tried the sata to sata power and it connects (obviously) I was just a big dummy for thinking that the sata power is bigger and cause of this it won't fit.I am sorry but also grateful for you help.