Ryzen Ram Compat Issue.

[Oryzaki]

So i have Ram that is listed as compatible on both AMD and Patriots Website as compatible with Ryzen 7 however when i get into windows it crashes with the BSOD error Memory managment. Normally i would just get some other ram but i cannot wait for shipping. Is their anyway for it to be fixed and work? Just in case you need to know its the Viper PVE48G213C4GY 

[ARikozuM]

Run Memtest86 from a USB. Also, full specs.

[Big-Pete]

+1 have an msi mortar with some gskill, rams rated at 3200 18 16 16 16 34, can only run it at 3066 cl16 

 

what board you using? try relaxing timings and dropping the speed? 

[Oryzaki]

Just now, ARikozuM said:

Run Memtest86 from a USB. Also, full specs.

I already did it came up with 0 errors 

X370 Prime Pro MOBO

GTX 1080

960evo 256GB

Viper 8gb

 

[Oryzaki]

1 minute ago, Big-Pete said:

+1 have an msi mortar with some gskill, rams rated at 3200 18 16 16 16 34, can only run it at 3066 cl16 

 

what board you using? try relaxing timings and dropping the speed? 

How do you relax timings? I already tried dropping speed but it was 2133 to start with 

 

[Big-Pete]

29 minutes ago, Oryzaki said:

How do you relax timings? I already tried dropping speed but it was 2133 to start with 

 

so instead of going for tight timing- (lower numbder= tighter. relax them by going from say- 16/16/16 to 18/18/18 

 

and JDec is 2133, try xmp/Axmp/DOCP. 

[Oryzaki]

4 minutes ago, Big-Pete said:

so instead of going for tight timing- (lower numbder= tighter. relax them by going from say- 16/16/16 to 18/18/18 

 

and JDec is 2133, try xmp/Axmp/DOCP. 

um so i tried DOCP same thing happened and i also tried all of the ram slots no dice. however i booted to diffferent drive and no it is flikering a blue screen and the desktop super quickly

also what settings affect timings

is it DRAM Timing Controls?

[Oryzaki]

 

12 minutes ago, Big-Pete said:

so instead of going for tight timing- (lower numbder= tighter. relax them by going from say- 16/16/16 to 18/18/18 

 

and JDec is 2133, try xmp/Axmp/DOCP. 

Okay figured it out changed it from 2133 to 1866 and changed latency to 18/18/18/18/32 still no dice. Then tried it with 2133 also did not work

 

[ARikozuM]

8 minutes ago, Oryzaki said:

 

Okay figured it out changed it from 2133 to 1866 and changed latency to 18/18/18/18/32 still no dice. Then tried it with 2133 also did not work

 

Return your motherboard.

[Oryzaki]

3 minutes ago, ARikozuM said:

Return your motherboard.

I've already done that before with the same board ??

and I can't wait for shipping

[Oryzaki]

Could it have something to do with the fact that I haven't updated the board or CPU microcode?

[ARikozuM]

6 minutes ago, Oryzaki said:

I've already done that before with the same board ??

and I can't wait for shipping

Have you tried the warranty for your CPU?

[Oryzaki]

2 minutes ago, ARikozuM said:

Have you tried the warranty for your CPU?

I got the CPU the day it came out I so I can't RMA?

[TrigrH]

update the bios.

[ARikozuM]

Just now, Oryzaki said:

I got the cup the day it came out I so I can't RMA?

Have you tried new RAM? Have you tried another CPU, a new disk, etc? 

 

It makes very little sense to keep a platform that doesn't perform up to its rated specs. 

[Oryzaki]

5 minutes ago, TrigrH said:

update the bios.

I would if that were possible but my computer crashes instantly 

[Oryzaki]

5 minutes ago, ARikozuM said:

Have you tried new RAM? Have you tried another CPU, a new disk, etc? 

 

It makes very little sense to keep a platform that doesn't perform up to its rated specs. 

I don't have any of those and I can't wait for shipping

[TrigrH]

Just now, Oryzaki said:

I would if that were possible but my computer crashes instantly 

update it in the bios.

[Oryzaki]

15 minutes ago, TrigrH said:

update it in the bios.

Cool all it took was a 2009 video from LTT to figure it out hope this works

[TrigrH]

Just now, Oryzaki said:

Cool all it took was a 2009 video from LTT to figure it out hope this works

wait have u done it already? dont update the bios yet if you havent, you should take some precautions

[Oryzaki]

46 minutes ago, TrigrH said:

wait have u done it already? dont update the bios yet if you havent, you should take some precautions

Too late now it's in the middle of updating

[TrigrH]

Just now, Oryzaki said:

Too late now it's in the middle of updating

well i told you within seconds of your post, and you took 47mins to reply so thats on you

[Oryzaki]

6 minutes ago, TrigrH said:

well i told you within seconds of your post, and you took 47mins to reply so thats on you

Yeah I know but it updated correctly I had to fix some door nobs

[TrigrH]

Just now, Oryzaki said:

Yeah I know but it updated correctly I had to fix some door nobs

awesome, so things should be fixed how (hopefully)

[Oryzaki]

13 minutes ago, TrigrH said:

well i told you within seconds of your post, and you took 47mins to reply so thats on you

Thanks so much updating the bios worked