Jump to content

What is wrong here?

ShatteredPsycho
 Share
Posted

Hello everyone, 

 

So for the past month my cpu has been reaching abnormal temps that it didn't use to

 

I've tried to adjust the overclock and so on but there must be something going on that I can't find out.

Recently I used the asus auto overclock tool, still, If I go to a game and stress it out it goes beyond what used to be a 75ªC Temp Max

 

And today I find this impossible thing (image)

 

I have an Asus A170-A motherboard, i5 6600K and CM Hyper 212X

 

Any ideas as to what might be going on?

capture.JPG

Link to comment
https://linustechtips.com/topic/798448-what-is-wrong-here/
Share on other sites
Link to post
Share on other sites
Posted

Dried thermal compound? Also, there seemed to be only 1 fan connected to the mobo?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/798448-what-is-wrong-here/#findComment-10046208
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Jurrunio said:

Dried thermal compound? Also, there seemed to be only 1 fan connected to the mobo?

I was going to change the thermal paste next, but this is just so odd. Afraid there is something wrong with the motherboard or cpu

There are 3 fans connected to the pc. You can scroll down on the fan space there

 

But do you see it marking 13.9 Ghz there?

Link to comment
https://linustechtips.com/topic/798448-what-is-wrong-here/#findComment-10046220
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, ShatteredPsycho said:

But do you see it marking 13.9 Ghz there?

I don't trust these tools other than Intel XTU. I use the BIOS to monitor these data

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/798448-what-is-wrong-here/#findComment-10046250
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, ShatteredPsycho said:

As should I it seems

 

Do you have any reference values for Vcore, etc, for my specs? I always drift a bit there

Hard to give a reference. In out-of-spec speeds, how low the vcore can go before crashing is different from chip to chip. I have seen people going at 1.25V @4.3GHz,, but others only get stable results at 1.3V @4GHz.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/798448-what-is-wrong-here/#findComment-10046276
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Jurrunio said:

Hard to give a reference. In out-of-spec speeds, how low the vcore can go before crashing is different from chip to chip. I have seen people going at 1.25V @4.3GHz,, but others only get stable results at 1.3V @4GHz.

Should I leave it as manual or offset?

And how about the other values? Should I leave them as they are?

X.M.P or no XMP?

Sry for all the questions xD

Link to comment
https://linustechtips.com/topic/798448-what-is-wrong-here/#findComment-10046280
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, ShatteredPsycho said:

Should I leave it as manual or offset?

And how about the other values? Should I leave them as they are?

X.M.P or no XMP?

Sry for all the questions xD

Use offset if you enabled c-state, which allows the clock speed to ramp down. This helps save power.

I'll leave the other values as they are. They won't affect stability unless you try overclocking as far as possible.

XMP or not depends on your RAM speed. If it is already running at your RAM speed then leave it as it is. If it runs slower then use XMP.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/798448-what-is-wrong-here/#findComment-10046311
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Jurrunio said:

Use offset if you enabled c-state, which allows the clock speed to ramp down. This helps save power.

I'll leave the other values as they are. They won't affect stability unless you try overclocking as far as possible.

XMP or not depends on your RAM speed. If it is already running at your RAM speed then leave it as it is. If it runs slower then use XMP.

All right thanks

Link to comment
https://linustechtips.com/topic/798448-what-is-wrong-here/#findComment-10046314
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×