Jump to content

Question about sleeving and cable position.

xHadrian
By xHadrian
in Cases and Mods
 Share
Go to solution Solved by matt_the_d0ct0r,

If I'm understanding you correctly, you just swapped the positions of a black wire and yellow wire, then No this won't be a problem. All the wires are the same, just plain copper wire. However, MAKE SURE they are swapped on BOTH the motherboard side and the PSU side! If not you will definitely have issues. Black is usually ground and yellow is usually 12 volt. Big difference. 

Posted

Willing to sleeve my PSU during the next week or so, however, I have a question.

 

For example, if I had a cable/pin in position one of the connectors, and I swapped it out for a cable/pin in position 8, while the first one being a yellow colored wire and the second a black colored one, would that be a problem?

 

Thanks.

Link to comment
https://linustechtips.com/topic/797563-question-about-sleeving-and-cable-position/
Share on other sites
Link to post
Share on other sites
Posted
  • Solution

If I'm understanding you correctly, you just swapped the positions of a black wire and yellow wire, then No this won't be a problem. All the wires are the same, just plain copper wire. However, MAKE SURE they are swapped on BOTH the motherboard side and the PSU side! If not you will definitely have issues. Black is usually ground and yellow is usually 12 volt. Big difference. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cases and Mods

×