Chassis intruded!

[Rekted]

I'm just bought an Asus P5WDG2 WS PRO (don't ask why). I install a PC2-5300 2GB ram in, an E2160 and a HD4850 from HIS. The thing booted and then show an error " Chassis intruded! Fatal error... System halted". I tried:
- reset cmos/bios settings
- use jumpers on the chassis intrusion headers

- this is on a test bench so no chassis intrusion sensor or switch attached
And I can't enter bios either, the splash screen appears, I spam Del then it just skip and shows the error
Help pls, much appreciate

Edited June 21, 2017 by Rekted
Pictures

[spwath]

On the motherboard there is a chassis intrusion header.

You probably need to bridge those pins.

It is to prevent people from opening system, server cases might have a cable for that.

But just bridge its pins.

[fjdhdhcyfhf]

its an old enterprise security feature. theres suppose to be a switch on the case that triggers this alarm when case is opened. You should be able to turn the alarm off in bios

[Rekted]

10 minutes ago, spwath said:

On the motherboard there is a chassis intrusion header.

You probably need to bridge those pins.

It is to prevent people from opening system, server cases might have a cable for that.

But just bridge its pins.

On the mb there are 2 headers, 1 is the cmos which is in 1-2(normal) position, the second header is in 3-4(intrusion sensor+ground). Everything seems right, but when i turn it on it throws me chassis intruded! Fatal error.... System halted

[Rekted]

Just now, SCHISCHKA said:

its an old enterprise security feature. theres suppose to be a switch on the case that triggers this alarm when case is opened. You should be able to turn the alarm off in bios

That's the main problem, i can't enter bios, the splash screen appears i spam Del and it just skip to the American Megatrends screen

[spwath]

7 minutes ago, Rekted said:

On the mb there are 2 headers, 1 is the cmos which is in 1-2(normal) position, the second header is in 3-4(intrusion sensor+ground). Everything seems right, but when i turn it on it throws me chassis intruded! Fatal error.... System halted

you need to bridge the pins of the intrusion and ground.

[Rekted]

1 minute ago, spwath said:

you need to bridge the pins of the intrusion and ground.

I did, still the error

[Rekted]

15 minutes ago, spwath said:

you need to bridge the pins of the intrusion and ground.

 

[HCKAROTU]

On 6/21/2017 at 5:58 AM, spwath said:

On the motherboard there is a chassis intrusion header.

You probably need to bridge those pins.

It is to prevent people from opening system, server cases might have a cable for that.

But just bridge its pins.

So just bridge them with that blue piece?