GPU BRACE need mesurment

[Justux204]

So other day somebody showed acrylic GPU brace but that shit was 50$ so i made my own varian, and sended to guys who cuts and graves acrylic to know price ofcourse no RGB... This should be fine for RX 580 Pulse any card that is 25cm long. Still need proper mesurments maybe sb wanna help? pci screw size and pci spacing size needed, and probably redraw in sketchup or similar program

As right now this is 25x5x1cm

[W-L]

4 hours ago, Justux204 said:

So other day somebody showed acrylic GPU brace but that shit was 50$ so i made my own varian, and sended to guys who cuts and graves acrylic to know price ofcourse no RGB... This should be fine for RX 580 Pulse any card that is 25cm long. Still need proper mesurments maybe sb wanna help? pci screw size and pci spacing size needed, and probably redraw in sketchup or similar program

As right now this is 25x5x1cm

Here are a few diagrams and information on PCI-E slots:

http://www.tomshardware.com/answers/id-2931969/motherboard-rear-pci-slot-measurements.html

http://www.protocase.com/pdf/How_to_design_enclosures_for_motherboard_based_systems_092010.pdf

[Justux204]

15 hours ago, W-L said:

Here are a few diagrams and information on PCI-E slots:

http://www.tomshardware.com/answers/id-2931969/motherboard-rear-pci-slot-measurements.html

http://www.protocase.com/pdf/How_to_design_enclosures_for_motherboard_based_systems_092010.pdf

Did my own sketchup http://prntscr.com/firp25

will print on paper and make prototype outif thin board