First Overclock...

[fast_eg6]

FX 8350.. @4.4ghz on hyper 212

Gigabyte 990fxa ud3 r5 MB

Stock Volts at 1.35V

Think I can get more out of it? And what is "Vcore Loadline Calibration? I have it on "Extreme" setting.. should I have it on medium, standard, or auto?

[tp95112]

Thats a good/decent overclock. What temps are you getting? Load Line Calibrator is what the motherboard uses to give extra voltage when vdroop occurs.For example, when you do a stress test you see the voltage will jump more then what you have set. It's for helping with stability. Depending on the board, I will use medium for yours but you might have to tinker around with it. Id stay away from extreme 

[fast_eg6]

Core and socket were both up at 63c

[fast_eg6]

19 hours ago, tp95112 said:

Thats a good/decent overclock. What temps are you getting? Load Line Calibrator is what the motherboard uses to give extra voltage when vdroop occurs.For example, when you do a stress test you see the voltage will jump more then what you have set. It's for helping with stability. Depending on the board, I will use medium for yours but you might have to tinker around with it. Id stay away from extreme 

Socket got up to 64c and core at 63c..  

[tp95112]

1 minute ago, fast_eg6 said:

Socket got up to 64c and core at 63c..  

Try lowering voltage a bit. You aren't to far from safe temp of 62c

[fast_eg6]

2 minutes ago, tp95112 said:

Try lowering voltage a bit. You aren't to far from safe temp of 62c

Ok. Thanks for the info brotha.