Jump to content

Couldn't think of a good title.

 

I know there's adapters/plugins whatever they're called to be able to use case fans without a pc (not sure what they're called though.

 

My intentions being for a little project I'm kind of curious about. I have a Ps4 pro that gets loud as fuck when playing a demanding game, the back half of the top panel gets very hot to the touch. I have well over a dozen Pc case fans lying around of varying sizes, so was wanting to do a little experiment to see if I could ghetto something together with the case fans to see if I can make my console cooler and a little quieter. Preferably a solution that lets me control fan speed so they're not going at 100%, although I do have those low power adapters some manufacturers include with their cases, so isn't a big deal if they aren't controllable

⣿⣿⣿⣿⣇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠉⠛⠻⣿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣦⠀⠀⠀⠀⠀⠀⠀⠀⢀⣤⣄⡀⠀⢻⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣇⠀⠀⠀⠀⠀⠀⠀⠸⣿⣿⣿⠃⢰⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣼⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⡆⠀⠀⠀⠀⠀⠀⢶⣶⣶⣾⣿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣧⠀⢠⡀⠐⠀⠀⠀⠻⢿⣿⣿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣿⡄⢸⣷⡄⠀⠣⣄⡀⠀⠉⠛⢿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣿⣇⠀⣿⣿⣦⠀⠹⣿⣷⣶⣦⣼⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣼⣿⣿⣿⣷⣄⣸⣿⣿⣿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⢿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿

⣿⣿⡿⢛⡙⢻⠛⣉⢻⣉⢈⣹⣿⣿⠟⣉⢻⡏⢛⠙⣉⢻⣿⣿⣿

⣿⣿⣇⠻⠃⣾⠸⠟⣸⣿⠈⣿⣿⣿⡀⠴⠞⡇⣾⡄⣿⠘⣿⣿⣿

⣿⣿⣟⠛⣃⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿

Link to comment
https://linustechtips.com/topic/788729-use-case-fans-without-a-pc/
Share on other sites

Link to post
Share on other sites

Just connect ground to the 1st pin and 12V wire to the 2nd pin to the fan and it starts spinning at it's full speed. 3rd and 4th pin don't need to be used.

You'd need a standard power brick for that and just a little DIY.

 

You could also get maybe a fan controller, connect 12V to that and then connect fans to that.

HAL9000: AMD Ryzen 9 3900x | Noctua NH-D15 chromax.black | 32 GB Corsair Vengeance LPX DDR4 3200 MHz | Asus X570 Prime Pro | ASUS TUF 3080 Ti | 1 TB Samsung 970 Evo Plus + 1 TB Crucial MX500 + 6 TB WD RED | Corsair HX1000 | be quiet Pure Base 500DX | LG 34UM95 34" 3440x1440

Hydrogen server: Intel i3-10100 | Cryorig M9i | 64 GB Crucial Ballistix 3200MHz DDR4 | Gigabyte B560M-DS3H | 33 TB of storage | Fractal Design Define R5 | unRAID 6.9.2

Carbon server: Fujitsu PRIMERGY RX100 S7p | Xeon E3-1230 v2 | 16 GB DDR3 ECC | 60 GB Corsair SSD & 250 GB Samsung 850 Pro | Intel i340-T4 | ESXi 6.5.1

Big Mac cluster: 2x Raspberry Pi 2 Model B | 1x Raspberry Pi 3 Model B | 2x Raspberry Pi 3 Model B+

Link to post
Share on other sites

Just now, Nuvi said:

You could also buy an external fan controller like this one which plugs in to AC and let's you control fan speeds

out of stock.

but I think I found a solution, a power cord that has a molex end to it, so I can plug in a molex to pwm devices, which I could use to power fans. don't have any means of controlling fan speed though except for those low power adapters I have from case fan manufacturers

⣿⣿⣿⣿⣇⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠉⠛⠻⣿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣦⠀⠀⠀⠀⠀⠀⠀⠀⢀⣤⣄⡀⠀⢻⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣇⠀⠀⠀⠀⠀⠀⠀⠸⣿⣿⣿⠃⢰⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣼⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⡆⠀⠀⠀⠀⠀⠀⢶⣶⣶⣾⣿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣧⠀⢠⡀⠐⠀⠀⠀⠻⢿⣿⣿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣿⡄⢸⣷⡄⠀⠣⣄⡀⠀⠉⠛⢿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣿⣇⠀⣿⣿⣦⠀⠹⣿⣷⣶⣦⣼⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣼⣿⣿⣿⣷⣄⣸⣿⣿⣿⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⢿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿

⣿⣿⡿⢛⡙⢻⠛⣉⢻⣉⢈⣹⣿⣿⠟⣉⢻⡏⢛⠙⣉⢻⣿⣿⣿

⣿⣿⣇⠻⠃⣾⠸⠟⣸⣿⠈⣿⣿⣿⡀⠴⠞⡇⣾⡄⣿⠘⣿⣿⣿

⣿⣿⣟⠛⣃⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⣿⣿⣿⣿⣿

⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×