help with build

[patriotaki]

so yesterday i tried to clean my cpu took it out of the socket and in the process i damaged the socket pins in mobo

 

i got a new mobo today gigabyte z270 gaming k3

when rebuilding the pc it couldnt boot with 2 ram sticks in mobo i upgraded the BIOS to F5 and it worked

 

although sometimes the pc froze and i had to reboot it but the pc goes to boot loop (fans start spining - stop and then start again)

 

i am running the pc with 1 ram stick atm formatted the disk reinstalled windows because i was getting blue screen all the time for many different reasons (when i entered my windows pass immediately blue screen)

 

now im doing the windows updates still with 1 ram stick i dont know how to solve this

 

http://www.gigabyte.com/Motherboard/GA-Z270-Gaming-K3-rev-10#support-dl

 

check that please

i have the F5 bios atm but F8b update is in beta al the f7 says that  i will not be able to downgrade to earlier version of bios

 

what should i do? update to the beta it has (ddr compatibility)

 

if something goes wrong with dual bios can i install the f5 again?

 

please help me its driving me nuts the whol day!

[patriotaki]

if i update to the latest stable BIOS i wont be able to downgrade according to website

 

[adnank77]

 I would also recommend updating to latest BIOS especially for a relatively new motherboard (even if it's BETA). 

 

Also, update the Firmware of your SSD if you are running one .. I had hang issues in my secondary build until I upgraded the SSD's firmware .. 

[patriotaki]

2 hours ago, adnank77 said:

 I would also recommend updating to latest BIOS especially for a relatively new motherboard (even if it's BETA). 

 

Also, update the Firmware of your SSD if you are running one .. I had hang issues in my secondary build until I upgraded the SSD's firmware .. 

ty i think now my pc is ok with 2 sticks

 

i cant find the lan ethernet driver for my motherboard..

 

pc was working fine for 1-2hours with 2 ram sticks suddenly it froze and on restart boot loop again!!!

 

now i can only run it with 1 stick

 

help me out pls its been 2 days im tryiung to fix this

[adnank77]

RAM speed is set to lowest in BIOS? Please make sure of that