Jump to content

I recently decided to update my drivers for my GTX 1070 and afterwards my screen went black and their was this wierd tile like pattern which appeared a minute later. It kinda looked like normal windows but with a line of giant pixels as my desktop. Afterwards I rebooted my PC and windows would not start and was stuck on a black screen with a loading icon. This happened before after driver updates so I booted into safe mode and uninstalled the driver and replaced it with the previous one, which was the only driver that appeared to work on my PC. However, after using my PC for a while and turning it off for the night, I came back the next day to find that it had gotten stuck on the same black screen with loading icon after I turned it on. I deleted the driver again and installed the earliest driver I could find. However, today I was playing overwatch and my screen suddenly went black and the same thing happened again! I don't know what to do now. In the past, I had reinstakled windows and that did not fix the issue. However, after the most recent update the drivers appear to be permemantly broken. Does anyone know how to fix this? And if I were to have to RMA my GPU, does anyone know what size screws and standoffs are used on the backplate? (I have a waterblock on my GPU, (the driver issues started before I installed the waterblock) and when I was reassembling the cooler I over tightened some of the screws and broke them in half and they are stuck in the standoff)

Alnair (Main PC):

CPU: i9-7900X with EK Supremacy RGB and SE 360 radiator

RAM: 32 GB Trident Z RGB 3000 MHz

MB: Gigabyte X299 Gaming 7

GPU: GTX 1070 Founder’s Edition

PSU: EVGA 850 G3

SSD: WD Blue M.2 1tb, Sandisk SSD Plus 1tb

 

Mistle (NAS):

CPU: Pentium G3258 with stock cooler

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI H81M-E33

GPU: Intel integrated 

PSU: 500w Cooler Master

HDD: 2 x 2tb WD Red in RAID 1

 

Armakarth (NAS/3D modeling station/my old computer)

CPU: i7-4790K with Hyper 212

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI Z97-G45

GPU: EVGA GT 740 SC

PSU: 750W Sentey

SSD: Sandisk SSD Plus 240GB

HDD: 2 x 2tb WD Red in RAID 1, 2tb Seagate Barracuda, 1tb WD Blue

 

The Pizza Cooker (server):

2x quad core 2.66 ghz Xeons

16gb DDR2 FBDIMM

 

Link to comment
https://linustechtips.com/topic/787985-gpu-artifacting-after-driver-install/
Share on other sites

Link to post
Share on other sites

Here is a picture of what happens after I try to install drivers: IMG_1833.thumb.JPG.314a60e8639787637fe1c8f82cd3c2a5.JPG

Alnair (Main PC):

CPU: i9-7900X with EK Supremacy RGB and SE 360 radiator

RAM: 32 GB Trident Z RGB 3000 MHz

MB: Gigabyte X299 Gaming 7

GPU: GTX 1070 Founder’s Edition

PSU: EVGA 850 G3

SSD: WD Blue M.2 1tb, Sandisk SSD Plus 1tb

 

Mistle (NAS):

CPU: Pentium G3258 with stock cooler

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI H81M-E33

GPU: Intel integrated 

PSU: 500w Cooler Master

HDD: 2 x 2tb WD Red in RAID 1

 

Armakarth (NAS/3D modeling station/my old computer)

CPU: i7-4790K with Hyper 212

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI Z97-G45

GPU: EVGA GT 740 SC

PSU: 750W Sentey

SSD: Sandisk SSD Plus 240GB

HDD: 2 x 2tb WD Red in RAID 1, 2tb Seagate Barracuda, 1tb WD Blue

 

The Pizza Cooker (server):

2x quad core 2.66 ghz Xeons

16gb DDR2 FBDIMM

 

Link to post
Share on other sites

try DDU, and reinstall again.

there's not really a better option. maybe try more voltage?

QUOTE/TAG ME WHEN REPLYING

Spend As Much Time Writing Your Question As You Want Me To Spend Responding To It.

If I'm wrong, please point it out. I'm always learning & I won't bite.

 

Laptop:

Lenovo Yoga 7 Air: Ryzen 7840S, 32GiB DDR5

 

Desktop (Old but I never replaced it):

Delidded Core i7 4770K - GTX 1070 ROG Strix - 16GB DDR3 @2000Mhz

Link to post
Share on other sites

1 minute ago, CmzPlusHardware said:

Try updating your BIOS or I would almost suggest an RMA. 

I have the latest BIOS...

Alnair (Main PC):

CPU: i9-7900X with EK Supremacy RGB and SE 360 radiator

RAM: 32 GB Trident Z RGB 3000 MHz

MB: Gigabyte X299 Gaming 7

GPU: GTX 1070 Founder’s Edition

PSU: EVGA 850 G3

SSD: WD Blue M.2 1tb, Sandisk SSD Plus 1tb

 

Mistle (NAS):

CPU: Pentium G3258 with stock cooler

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI H81M-E33

GPU: Intel integrated 

PSU: 500w Cooler Master

HDD: 2 x 2tb WD Red in RAID 1

 

Armakarth (NAS/3D modeling station/my old computer)

CPU: i7-4790K with Hyper 212

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI Z97-G45

GPU: EVGA GT 740 SC

PSU: 750W Sentey

SSD: Sandisk SSD Plus 240GB

HDD: 2 x 2tb WD Red in RAID 1, 2tb Seagate Barracuda, 1tb WD Blue

 

The Pizza Cooker (server):

2x quad core 2.66 ghz Xeons

16gb DDR2 FBDIMM

 

Link to post
Share on other sites

5 minutes ago, CmzPlusHardware said:

Try updating your BIOS or I would almost suggest an RMA. 

 

Edit: If you go to device manager and select the card, does it say its working properly or does is there an error?

It says it's working properly when the driver is working

Alnair (Main PC):

CPU: i9-7900X with EK Supremacy RGB and SE 360 radiator

RAM: 32 GB Trident Z RGB 3000 MHz

MB: Gigabyte X299 Gaming 7

GPU: GTX 1070 Founder’s Edition

PSU: EVGA 850 G3

SSD: WD Blue M.2 1tb, Sandisk SSD Plus 1tb

 

Mistle (NAS):

CPU: Pentium G3258 with stock cooler

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI H81M-E33

GPU: Intel integrated 

PSU: 500w Cooler Master

HDD: 2 x 2tb WD Red in RAID 1

 

Armakarth (NAS/3D modeling station/my old computer)

CPU: i7-4790K with Hyper 212

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI Z97-G45

GPU: EVGA GT 740 SC

PSU: 750W Sentey

SSD: Sandisk SSD Plus 240GB

HDD: 2 x 2tb WD Red in RAID 1, 2tb Seagate Barracuda, 1tb WD Blue

 

The Pizza Cooker (server):

2x quad core 2.66 ghz Xeons

16gb DDR2 FBDIMM

 

Link to post
Share on other sites

I think it's some kind of issue with the driver installed or GeForce experience because it appears to only occur when those things are open

The crashes, that is.

Alnair (Main PC):

CPU: i9-7900X with EK Supremacy RGB and SE 360 radiator

RAM: 32 GB Trident Z RGB 3000 MHz

MB: Gigabyte X299 Gaming 7

GPU: GTX 1070 Founder’s Edition

PSU: EVGA 850 G3

SSD: WD Blue M.2 1tb, Sandisk SSD Plus 1tb

 

Mistle (NAS):

CPU: Pentium G3258 with stock cooler

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI H81M-E33

GPU: Intel integrated 

PSU: 500w Cooler Master

HDD: 2 x 2tb WD Red in RAID 1

 

Armakarth (NAS/3D modeling station/my old computer)

CPU: i7-4790K with Hyper 212

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI Z97-G45

GPU: EVGA GT 740 SC

PSU: 750W Sentey

SSD: Sandisk SSD Plus 240GB

HDD: 2 x 2tb WD Red in RAID 1, 2tb Seagate Barracuda, 1tb WD Blue

 

The Pizza Cooker (server):

2x quad core 2.66 ghz Xeons

16gb DDR2 FBDIMM

 

Link to post
Share on other sites

install the driver but don't install GeForce experience

24 minutes ago, david31160 said:

I think it's some kind of issue with the driver installed or GeForce experience because it appears to only occur when those things are open

The crashes, that is.

 

QUOTE/TAG ME WHEN REPLYING

Spend As Much Time Writing Your Question As You Want Me To Spend Responding To It.

If I'm wrong, please point it out. I'm always learning & I won't bite.

 

Laptop:

Lenovo Yoga 7 Air: Ryzen 7840S, 32GiB DDR5

 

Desktop (Old but I never replaced it):

Delidded Core i7 4770K - GTX 1070 ROG Strix - 16GB DDR3 @2000Mhz

Link to post
Share on other sites

UPDATE: I fixed it.

So apparently after I used DDU to uninstall my driver and rebooted to reinstall the driver, windows update would install a different driver before or after I installed the driver I wanted. That driver was the one causing issues. So I rebooted into safe mode and rolled back the driver installed by windows update and that appeared to work.

Alnair (Main PC):

CPU: i9-7900X with EK Supremacy RGB and SE 360 radiator

RAM: 32 GB Trident Z RGB 3000 MHz

MB: Gigabyte X299 Gaming 7

GPU: GTX 1070 Founder’s Edition

PSU: EVGA 850 G3

SSD: WD Blue M.2 1tb, Sandisk SSD Plus 1tb

 

Mistle (NAS):

CPU: Pentium G3258 with stock cooler

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI H81M-E33

GPU: Intel integrated 

PSU: 500w Cooler Master

HDD: 2 x 2tb WD Red in RAID 1

 

Armakarth (NAS/3D modeling station/my old computer)

CPU: i7-4790K with Hyper 212

RAM: 8GB HyperX Fury DDR3 1600 MHz

MB: MSI Z97-G45

GPU: EVGA GT 740 SC

PSU: 750W Sentey

SSD: Sandisk SSD Plus 240GB

HDD: 2 x 2tb WD Red in RAID 1, 2tb Seagate Barracuda, 1tb WD Blue

 

The Pizza Cooker (server):

2x quad core 2.66 ghz Xeons

16gb DDR2 FBDIMM

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×